Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

SXDOOL

SXDOOL 90mm 3-pin case fan 12V 0.16A 2500RPM 19dB

SKU CH-Z1T3-R4NMW

A 90 mm chassis fan spins at 2500 RPM while producing only 19 dB of noise

  • Fan Size90mm
  • Power Connector3 Pin
  • Ultra-quiet cooling at only 19 dB(A)
  • 2500 RPM airflow for steady component temperatures
  • 3-pin connector enables motherboard speed monitoring
  • 90 mm frame fits standard chassis mounting points
  • Low 0.16 A draw keeps power usage minimal

Compact 90 mm chassis fan

The SXDOOL 90 mm case fan runs on 12 V and draws 0.16 A through a three-pin connector. It spins at roughly 2500 RPM while producing 19 dB(A) of noise, making it a quiet choice for tight builds. The red, black and yellow leads provide power, ground and a speed signal for monitoring. It fits 90 mm or 92 mm mounting holes with a 25 mm frame depth.

Suited for low-noise intake or exhaust

This fan suits builders who need a slender 90 mm unit for case ventilation, power-supply replacement or small-form-factor chassis where space is limited. The fixed-voltage three-pin design means speed scales with voltage rather than a PWM signal. It is not for systems that require four-pin PWM control or higher airflow than 2500 RPM can deliver.

Three-pin voltage-controlled connector

The single specification that decides fit is the three-pin 12 V connector, which only supports voltage-based speed regulation. Motherboards or fan controllers without a three-pin header cannot drive this fan directly. Verify the header type before purchase.

Helstu kostir

  • Ultra-quiet cooling at only 19 dB(A)
  • 2500 RPM airflow for steady component temperatures
  • 3-pin connector enables motherboard speed monitoring
  • 90 mm frame fits standard chassis mounting points
  • Low 0.16 A draw keeps power usage minimal

Tæknilýsing

Fan Size90mm
Power Connector3 Pin

Spurningar um þessa vöru

Does the fan ship with mounting screws or do I need to buy them separately?

The listing only describes the fan itself — a 90 mm unit with a 3-pin connector — so mounting screws are not included and must be sourced separately.

Should I choose the 90 mm or 92 mm frame size for my case?

The product is specified as 90×90×25 mm and also noted as compatible with 92×92×25 mm mounting holes, so either frame size will fit the same fan.

How loud is 19 dB(A) at 2500 RPM inside a typical PC case?

At 19 dB(A) the fan is rated as very quiet; at 2500 RPM it moves enough air for general chassis cooling while remaining barely audible in most builds.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.