Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black 120 mm square case fan with seven blades and a 2-pin power connector

SXDOOL

SXDOOL AD1212HB-A71GL 120mm 25mm 12V .34A 2-pin case fan

SKU CH-AWMM-Y43VB MPN AD1212HB-A71GL

120 mm 25 mm thick dual-ball-bearing case fan spinning 2500-2999 RPM for over 80 CFM at 35-40 dBA on a 12 V 0.34 A two-pin connector

  • TypeCase Fan
  • Bearing Type2 Ball
  • RPM2500-2999 RPM
  • Air Flow>80 CFM
  • Noise Level35 - 40 dBA
  • Power Connector2 Pin
  • Strong airflow for chassis cooling with 87.870 CFM
  • Low-noise operation at 39.1 dB/A measured sound
  • Dual ball bearing design for extended durability
  • 12 V 0.34 A draw keeps power consumption modest
  • Standard 120 mm frame fits most case mounts

Product identity and target user

The SXDOOL AD1212HB-A71GL is a 120 mm case fan with a 25 mm frame, designed for chassis heat dissipation. It runs on 12 V DC at .34 A and connects via a 2-pin power connector. The unit suits builders who need a straightforward black fan without LED lighting.

Thermals noise and power draw

Rated speed ranges from 2500 to 2999 RPM, delivering airflow greater than 80 CFM. Acoustic output is specified between 35 and 40 dBA. The 2-ball bearing supports continuous operation at the rated current of .34 A.

Sustained load behaviour

Manufacturer data lists a minimum speed of 2200 RPM with 87.870 CFM airflow and 39.1 dBA noise. The double ball bearing construction is intended to maintain consistent performance over extended periods. UL, CUL, CE, TUV and ROhS certifications are noted.

Helstu kostir

  • Strong airflow for chassis cooling with 87.870 CFM
  • Low-noise operation at 39.1 dB/A measured sound
  • Dual ball bearing design for extended durability
  • 12 V 0.34 A draw keeps power consumption modest
  • Standard 120 mm frame fits most case mounts

Tæknilýsing

TypeCase Fan
Bearing Type2 Ball
RPM2500-2999 RPM
Air Flow>80 CFM
Noise Level35 - 40 dBA
Power Connector2 Pin
ColorBlack
LEDNon-LED

Spurningar um þessa vöru

How is the AD1212HB-A71GL mounted and what step is often missed?

Mount the 120 mm frame with four screws; the step often missed is aligning the airflow arrow on the housing so air moves from front to rear.

What maintenance will the double ball bearing need later?

The double ball bearing is sealed for life and requires no lubrication; if noise rises above 39.1 dB/A after years, replace the entire fan.

At what point does the 0.34 A current limit show up under sustained load?

The fan draws a steady 0.34 A at 12 V; the limit appears only if the motherboard header cannot supply that current continuously.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.