Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black 80mm square frame fan with 25mm depth and two-wire 2-pin connector

SXDOOL

SXDOOL CHA8024EBN-K 80mm DC24V 0.24A 2-pin case fan

SKU CH-ZKWE-FE2VT MPN CHA8024EBN-K

An 80 mm DC 24 V 0.24 A two-pin case fan for computer and industrial cooling

  • Fan Size80mm
  • Power Connector2 Pin
  • 80 mm frame fits tight chassis spaces
  • DC 24 V 0.24 A input keeps power draw low
  • 25 mm thickness suits standard 8025 mounting holes
  • Two-pin connector enables simple polarity wiring
  • Designed for industrial, inverter and PC cooling duties

Compact 80 mm DC cooling fan

This 80 mm frame fan runs on 24 V DC and draws 0.24 A through a simple 2-pin connector. It is aimed at builders who need a small, direct-drive airflow source for tight chassis, industrial enclosures or projector housings. The 25 mm thickness fits standard 8025 mounting holes without adapters.

Steady airflow at constant voltage

Because the motor receives fixed 24 V DC, rotational speed and airflow remain stable as long as the supply holds regulation. There is no PWM curve to manage, so acoustic output and cooling capacity do not fluctuate during prolonged operation. The design suits equipment that runs continuously rather than in short bursts.

Simple two-wire installation

Only power and ground wires are present, so polarity must be observed when connecting to a 24 V rail or external supply. No speed signal or control wire exists, preventing fan-header monitoring or automatic speed scaling. Installers should verify voltage compatibility before powering the unit to avoid damage.

Helstu kostir

  • 80 mm frame fits tight chassis spaces
  • DC 24 V 0.24 A input keeps power draw low
  • 25 mm thickness suits standard 8025 mounting holes
  • Two-pin connector enables simple polarity wiring
  • Designed for industrial, inverter and PC cooling duties

Tæknilýsing

Fan Size80mm
Power Connector2 Pin

Spurningar um þessa vöru

How much noise and heat does the 80mm CHA8024EBN-K add when it runs continuously at 24 V?

The fan is rated at 0.24 A on a 24 V supply, so its power draw is low and its own heat output inside the chassis stays minimal during all-day operation.

What power source must I already have to run this 2-pin 24 V fan?

You need a 24 V DC supply or header that can deliver at least 0.24 A and a matching 2-pin connector for the two-wire lead.

Will the 80*80*25 mm frame and 2-pin wiring fit the older industrial computer or projector I want to cool?

The fan measures 80 mm square by 25 mm thick with a standard two-wire 2-pin plug, matching the mounting holes and power interface used in many legacy industrial and projector chassis.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.