SXDOOL
SXDOOL PA55H3-C 172×150×50mm AC 100V case fan
AC 100 V case fan measuring 172 × 150 × 50 mm with double ball bearings, 149–160 CFM airflow and 52–55 dB-A noise
- TypeCase Fan
- Reliable long-term cooling with 50000-hour double ball bearing life
- Strong airflow of 149 to 160 CFM from 172×150×50 mm frame
- Efficient 100 V AC operation at 38 W with 0.18 to 0.21 A draw
- Quiet running at 52 to 55 dB-A despite 2500 to 2800 RPM speed
- Durable Class B insulation rated to 155 °C with precision imported bearings
AC 100V Case Fan
The SXDOOL PA55H3-C is a 172×150×50mm AC-powered case fan rated for 100V mains supply. It uses a double ball bearing and runs at 2500 or 2800 R/min depending on load. The unit draws 0.18/0.21A and consumes 38W while delivering 149/160 CFM of airflow. It is built for industrial enclosures or specialist builds that can feed AC power directly to a fan.
Suited for AC-powered enclosures
This fan suits integrators who have a 100V AC circuit available inside the chassis and need 50000-hour bearing life with Class B insulation rated to 155°C. It is not for builders who power fans from a motherboard header or a low-voltage DC supply, nor for anyone needing a compact low-noise fan for a standard desktop case.
100V AC operating voltage
The single specification that decides fitment is the 100V AC working voltage. Without a matching AC source and appropriate safety wiring, the fan cannot operate. Check your enclosure's power distribution before ordering.
Helstu kostir
- Reliable long-term cooling with 50000-hour double ball bearing life
- Strong airflow of 149 to 160 CFM from 172×150×50 mm frame
- Efficient 100 V AC operation at 38 W with 0.18 to 0.21 A draw
- Quiet running at 52 to 55 dB-A despite 2500 to 2800 RPM speed
- Durable Class B insulation rated to 155 °C with precision imported bearings
Tæknilýsing
| Type | Case Fan |
|---|
Spurningar um þessa vöru
Does the PA55H3-C include mounting screws or a power cable, or must they be bought separately?
The fan is supplied as the motor and frame only; mounting hardware and an AC power lead are not included and must be sourced separately.
Should I choose the 0.18 A / 2500 rpm setting or the 0.21 A / 2800 rpm setting for my build?
The lower figure runs at 2500 rpm with 149 CFM and 52 dB-A; the higher figure runs at 2800 rpm with 160 CFM and 55 dB-A — pick the lower for quieter operation or the higher for maximum airflow.
What does the 38 W rating mean when the fan is installed in a 100 V AC system?
At 100 V AC the fan draws 0.18 A at low speed or 0.21 A at high speed, consuming 38 W in either case while delivering 149 or 160 CFM respectively.
Einnig í þessum vöruflokki
Fólk bar þetta saman
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



