Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular silver duplicator unit with nine M.2 slots and SATA ports on top

Systor

Systor SYSNVME-YL06PRO09 1-to-9 NVMe/SATA Duplicator 36GB/min

SKU CH-RXBQ-QZ6KJ

Standalone duplicator copies up to nine NVMe or SATA drives at 36 GB/min with downloadable event logs

  • TypeHard Drive Duplicator
  • Target1 to 9
  • Data Transfer Rate600MB/s
  • Operating TypeStandalone
  • Dimensions (H x W x D)18 x 8.25 x 6

TARGET SIZE 1 to 09

DATA TRANSFER RATE 36.0GB/min [600MB/sec] HDD RACK

  • Copies up to nine drives simultaneously from one source
  • Transfers data at up to 36 GB per minute
  • Works standalone with no computer or software required
  • Accepts NVMe and SATA drives in 2.5" and 3.5" sizes
  • Downloadable event log records every job detail

Standalone 1-to-9 NVMe/SATA Duplicator

The Systor SYSNVME-YL06PRO09 copies or sanitises up to nine target drives from a single source without a host computer. It supports NVMe and SATA M.2 modules in 2230, 2242, 2260 and 2280 sizes plus 2.5 and 3.5 inch SATA SSDs and HDDs. The unit suits IT departments, forensic labs and data-centre teams that need repeatable, high-volume cloning.

Open Platform With 22 mm Key Slots

An open platform design accepts B-key, M-key and B+M-key M.2 devices alongside standard SATA drives of 2 TB and above. Each slot is 22 mm wide, so modules seat directly without adapters. The standalone chassis measures 18 by 8.25 by 6 inches and operates from a single button, eliminating software installation and PC downtime.

Replaces Slower Single-Bay Copiers

Legacy single-target duplicators force sequential runs that multiply labour when deploying fleets of drives. This nine-target unit finishes a full batch at up to 36 GB per minute with no speed degradation across ports. The jump is worth it when daily workloads exceed a few drives and audit-ready event logs are required for compliance.

Helstu kostir

  • Copies up to nine drives simultaneously from one source
  • Transfers data at up to 36 GB per minute
  • Works standalone with no computer or software required
  • Accepts NVMe and SATA drives in 2.5" and 3.5" sizes
  • Downloadable event log records every job detail

Tæknilýsing

BrandSystor
ModelSYSNVME-YL06PRO09
Part NumberSYSNVME-YL06PRO09
TypeHard Drive Duplicator
Target1 to 9
Data Transfer Rate600MB/s
Operating TypeStandalone
Dimensions (H x W x D)18 x 8.25 x 6

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What does the 600 MB/s transfer rate cap in practice?

The 600 MB/s rate caps the SATA interface; actual duplication reaches up to 36 GB/min and varies with the source and target drive speeds.

What physical space and drive sizes does the unit accommodate?

The chassis measures 18 x 8.25 x 6 inches and accepts M.2 modules 2230, 2242, 2260, 2280 plus 2.5" and 3.5" SATA drives.

How do I start a copy job and what step is often missed?

Insert the source drive into the master slot, load up to nine target drives, select the copy mode, then press the start button; the step often missed is verifying the event log after the job finishes.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.