Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

Team Group

Team Group CTCMD5384G6000HC30FOC01 384GB (8x48GB) DDR5 6000 CL30 ECC RDIMM 1.4V

SKU CH-A8ZQ-YJW9D MPN CTCMD5384G6000HC30FOC01

Eight registered DDR5 modules deliver 384 GB of ECC capacity at 6000 MT/s with CL30 timing and 1.4 V operation

  • Capacity384GB (8 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6000 (PC5 48000)
  • CAS LatencyCL30
  • Timing30-36-36-96
  • Voltage1.40V

Capacity

  • 128GB (4 x 32GB)
  • 128GB (8 x 16GB)
  • 192GB (4 x 48GB)
  • 192GB (8 x 24GB)
  • 256GB (8 x 32GB)
  • 384GB (8 x 48GB)
  • 64GB (4 x 16GB)
  • 96GB (4 x 24GB)

Yfirstrikaðar útgáfur eru til, en ekki til hér.

Speed DDR5 6000 (PC5 48000)

  • Massive 384 GB capacity for heavy workloads
  • DDR5 6000 speed with CL30 low latency
  • Registered ECC RDIMM ensures data integrity
  • Aluminum heat spreader enables stable thermals
  • Intel XMP 3.0 and AMD EXPO one-click overclocking

384GB DDR5 ECC RDIMM kit for workstations

This 384GB kit contains eight 48GB DDR5 registered DIMMs rated at 6000 MT/s with CL30 latency. It targets workstations and servers that require error-correcting memory for data integrity. The modules use Hynix ICs and an aluminium heat spreader.

Registered DDR5 limited to platforms

The RDIMM form factor and registered buffer restrict use to motherboards and chipsets that explicitly support registered DDR5 memory. Standard consumer platforms cannot accept these modules. The 1.40V operating voltage and XMP 3.0 or EXPO profiles require compatible firmware to reach the rated 6000 MT/s speed.

Replaces smaller-capacity or non-ECC DDR5 kits

Upgrading from lower-density or unbuffered kits adds 384GB of ECC-protected capacity in a single validated set. The jump is worth it when workloads demand maximum registered memory capacity and error correction for stability. Builders needing unbuffered UDIMMs or lower total capacity should look elsewhere.

Helstu kostir

  • Massive 384 GB capacity for heavy workloads
  • DDR5 6000 speed with CL30 low latency
  • Registered ECC RDIMM ensures data integrity
  • Aluminum heat spreader enables stable thermals
  • Intel XMP 3.0 and AMD EXPO one-click overclocking

Tæknilýsing

BrandTeam
SeriesT-Create Master
ModelMASTER DDR5 WORKSTATION MEMORY BLACK
Part NumberCTCMD5384G6000HC30FOC01
Capacity384GB (8 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6000 (PC5 48000)
CAS LatencyCL30
Timing30-36-36-96
Voltage1.40V
ECCYes
Buffered/RegisteredRegistered
BIOS/Performance ProfileIntel XMP 3.0 and AMD EXPO
ChipsetAMD TRX50/WRX90
Heat SpreaderAluminum
Sendingarþyngd0.73 kg
Stærð sendingar182 × 150 × 70 mm

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Should I pick the 384GB kit with eight 48GB modules or a smaller capacity?

The kit provides 384GB total across eight 48GB DDR5 RDIMMs; choose it when your workstation board has eight slots and the workload needs that density.

What does DDR5 6000 CL30 deliver in a real TRX50 or WRX90 system?

At 6000 MT/s with 30-36-36-96 timings and 1.40V, the modules run at the rated overclock profile through Intel XMP 3.0 or AMD EXPO, giving high throughput with ECC protection.

How does the 288-pin RDIMM interface and registered buffer affect usable speed?

The registered DDR5 RDIMM format adds a clock cycle for command buffering, so the 6000 MT/s data rate is the practical ceiling on supported TRX50 and WRX90 platforms.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.