Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Low-profile aluminium and copper heatsink with 80mm black fan

Thermaltake

Thermaltake CL-P004-AL08BL-A MeOrb II 80mm 65W CPU cooler

SKU CH-WY2A-MMKZJ MPN CL-P004-AL08BL-A

Low-profile 80 mm cooler handles 65 W CPUs with an aluminium-and-copper heatsink and 25 CFM airflow at 18.5–28 dBA

  • Fan Size80mm
  • RPM1500-2500RPM
  • Air Flow25 CFM
  • Noise Level18.5~ 28 dBA
  • Power Connector4 Pin
  • Heatsink MaterialAluminum & Copper
  • Low noise at 18.5~28 dBA for quiet operation
  • 80 mm fan delivers 25 CFM airflow for effective cooling
  • Copper and aluminium heatsink transfers heat efficiently
  • 35 mm height fits low-profile builds
  • 4-pin connector enables PWM speed control

Compact Low-Profile Cooler for 65W CPUs

The Thermaltake MeOrb II is an 80mm air cooler rated for 65W thermal design power. It targets small-form-factor builds using Intel or AMD sockets where height clearance is limited. The aluminium and copper heatsink measures 35mm tall, 92mm wide and 84mm long.

65W Capacity with Limited Headroom

At 25 CFM airflow the cooler handles stock-speed 65W processors in typical office or home-theatre workloads. Sustained all-core loads or overclocked operation will exceed its dissipation capability and cause throttling. It is not suited for higher-TDP chips or heavy multi-threaded rendering.

Quiet 4-Pin PWM Operation

The 80mm fan spins between 1500 and 2500 RPM via a 4-pin connector, producing 18.5 to 28 dBA across the speed range. Power draw remains minimal thanks to the low-speed design. The unit weighs 0.33 lb, placing little stress on the motherboard mounting points.

Helstu kostir

  • Low noise at 18.5~28 dBA for quiet operation
  • 80 mm fan delivers 25 CFM airflow for effective cooling
  • Copper and aluminium heatsink transfers heat efficiently
  • 35 mm height fits low-profile builds
  • 4-pin connector enables PWM speed control

Tæknilýsing

BrandThermaltake
ModelCL-P004-AL08BL-A
Fan Size80mm
RPM1500-2500RPM
Air Flow25 CFM
Noise Level18.5~ 28 dBA
Power Connector4 Pin
Heatsink MaterialAluminum & Copper
Fan DimensionsØ80 x 25 mm
Heatsink Dimensions35 x 92 x 84mm (H x W x L)
Weight0.33 lb.
Sendingarþyngd0.32 kg
Stærð sendingar117 × 117 × 61 mm

Spurningar um þessa vöru

Will the 35 mm tall heatsink and 80 mm fan clear the motherboard VRM heatsinks I already have?

The cooler stands 35 mm high with an 80 mm fan, leaving room for most low-profile VRM coolers; check your board's VRM heatsink height against 35 mm.

How can I confirm the fan is running at the correct 1500-2500 RPM range after installation?

Monitor the 4-pin PWM fan speed in BIOS or software; it should report between 1500 and 2500 RPM under load.

Does the package include mounting hardware for both Intel and AMD sockets, or must I buy a separate bracket kit?

The box contains the aluminum and copper heatsink, 80 mm fan, and mounting hardware for current Intel and AMD platforms; no extra bracket is required.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.