Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two black 120 mm case fans with seven blades each, 25 mm thick, hydraulic bearing, non-LED, PWM 4-pin connectors

Thermaltake

Thermaltake CT120 2-Fan Pack 120mm PWM 500-2000 RPM CL-F147-PL12BL-A

SKU CH-4JQP-FWVKZ MPN CL-F147-PL12BL-A

Two 120 mm hydraulic-bearing fans with daisy-chain PWM control, 500–2000 RPM, 57.05 CFM airflow at 25.8 dB-A

  • Fan Counts2 Fans
  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing
  • RPMPWM 500~2000 R.P.M

LED Non-LED

Model CT120

  • Two fans in one pack simplify case airflow upgrades
  • Daisy-chain wiring cuts cable count and frees motherboard headers
  • PWM control spans 500 to 2000 RPM for flexible speed curves
  • Hydraulic bearing keeps noise at 25.8 dB-A while delivering 57.05 CFM
  • Anti-vibration mounts on a 25 mm frame reduce chassis resonance

Two-Fan Pack for Case Cooling

This 2-fan pack supplies a pair of 120 mm case fans with hydraulic bearings and PWM control. The black, non-LED units suit builders who want straightforward airflow without lighting. Each fan measures 120 x 120 x 25 mm and connects via a standard 4-pin PWM header.

Daisy-Chain Wiring Under Load

The daisy-chain design lets both fans run from a single motherboard header, reducing cable clutter while maintaining PWM speed control across the 500-2000 RPM range. At full speed the pair delivers 57.05 CFM each at 25.8 dB-A, and the hydraulic bearing is rated for sustained operation.

57.05 CFM Airflow per Fan

The 57.05 CFM rating at 2000 RPM is the key figure for matching these fans to your case’s airflow requirements. If your build needs higher static pressure or greater volume per fan, this specification determines whether the CT120 meets the target.

Helstu kostir

  • Two fans in one pack simplify case airflow upgrades
  • Daisy-chain wiring cuts cable count and frees motherboard headers
  • PWM control spans 500 to 2000 RPM for flexible speed curves
  • Hydraulic bearing keeps noise at 25.8 dB-A while delivering 57.05 CFM
  • Anti-vibration mounts on a 25 mm frame reduce chassis resonance

Tæknilýsing

BrandThermaltake
ModelCT120 PC Cooling Fan (2-Fan Pack)
Part NumberCL-F147-PL12BL-A
Fan Counts2 Fans
TypeCase Fan
CompatibilityCase
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPMPWM 500~2000 R.P.M
Air Flow57.05 CFM
Noise Level25.8 dB-A
Power Connector4 PIN PWM
ColorBlack
LEDNon-LED
Dimensions120 x 120 x 25 mm
Sendingarþyngd0.54 kg
Stærð sendingar188 × 140 × 61 mm

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How loud are the CT120 fans when they run at full speed all day?

At maximum 2000 RPM the fans produce 25.8 dB-A, a level most people barely hear over typical system noise.

What motherboard header do I need to control both fans in the pack?

Each fan uses a 4-pin PWM connector and the daisy-chain design lets both fans run from a single motherboard header.

Will the 25 mm thick CT120 fans fit in the same 120 mm mounts as my older case fans?

Yes, they share the standard 120 x 120 x 25 mm dimensions, so they drop into any existing 120 mm mounting points.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.