Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Four black DDR4 memory sticks with RGB lighting

Timetec

Timetec Pinnacle Konduit RGB 32GB (4x8GB) DDR4 3200MHz CL16-18-18-38 1.35V Black desktop RAM

SKU CH-QKFK-TRY2A

A 32 GB desktop kit of four 8 GB DDR4 modules running at 3200 MHz with CL16 timing, 1.35 V operation and eight-zone RGB lighting per stick that syncs with major motherboard software

  • Capacity32GB (4 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ColorBlack

Capacity 32GB (4 x 8GB)

  • 32 GB capacity across four 8 GB modules for multitasking headroom
  • DDR4 3200 MT/s with CL16 latency for responsive gaming performance
  • 35 V operation and XMP 2.0 profile for efficient one-click overclocking
  • Eight RGB zones per module sync with ASUS Aura, Gigabyte Fusion, MSI Mystic Light and ASRock Polychrome
  • Black aluminium heat spreader keeps modules cool under sustained loads

32GB RGB DDR4 kit for gaming builds

This Timetec Pinnacle Konduit RGB kit delivers 32GB of DDR4 memory across four 8GB modules. It targets gamers and PC enthusiasts who want high-speed performance with synchronised lighting. The black aluminium heat spreaders feature eight RGB zones per module. Compatibility covers both AMD and Intel desktop platforms.

Upgrade from standard 2400MHz memory

Systems running at the default 2400MHz base speed gain a direct jump to 3200MHz when the XMP 2.0 profile is enabled in the BIOS. The move is worth it for workloads that benefit from the higher 25,600MB/s bandwidth and tighter CL16-18-18-38 timings. Without XMP activation the modules remain at the lower frequency. Builders who cannot adjust BIOS settings will not reach the rated speed.

Four-module layout fills standard desktop slots

The 288-pin unbuffered non-ECC DIMMs occupy four memory slots on a typical consumer motherboard. Single-rank 1Rx8 organisation helps stability at the rated voltage of 1.35V. RGB control requires motherboard software such as ASUS Aura, Gigabyte RGB Fusion, MSI Mystic Light or ASRock Polychrome Sync. The kit leaves no spare slots for further capacity expansion on mainstream boards.

Helstu kostir

  • 32 GB capacity across four 8 GB modules for multitasking headroom
  • DDR4 3200 MT/s with CL16 latency for responsive gaming performance
  • 35 V operation and XMP 2.0 profile for efficient one-click overclocking
  • Eight RGB zones per module sync with ASUS Aura, Gigabyte Fusion, MSI Mystic Light and ASRock Polychrome
  • Black aluminium heat spreader keeps modules cool under sustained loads

Tæknilýsing

Capacity32GB (4 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ColorBlack

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What motherboard slot and pin count does this 288-pin DDR4 kit require?

It fits standard desktop DDR4 slots with 288 pins and runs at 1.35V.

How do I enable the rated 3200MHz speed instead of the default 2400MHz?

Enter the BIOS and turn on the XMP 2.0 profile; a single setting applies the CL16-18-18-38 timings automatically.

Can the aluminium heat spreader be removed for cleaning or replacement?

The spreader is fixed to the modules and is not designed to be removed; dust can be cleared with compressed air.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.