Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Open zipper tool bag showing 42-piece 3D printer tool set with needles, brushes, tweezers, knife

TIOPY S-TOOL KIT 42 Piece 3D Printer Tool Set

SKU CH-DQDA-JPBGR

A 42-piece maintenance kit with 31 stainless-steel cleaning needles in nine sizes, wire brushes, tweezers and a carving knife with five spare blades

  • ColorMulti-color
  • TypeS-TOOL KIT
  • 42-piece kit covers every nozzle maintenance task
  • 31 stainless needles in 9 sizes from .15 to .80 mm clear most clogs
  • Carving knife with 5 spare blades removes print burrs fast
  • Copper and stainless wire brushes scrub hot-end residue clean
  • Straight and curved tweezers reach awkward nozzle angles

Tool kit for FDM printer maintenance

The 42-piece set equips FDM printer owners with 31 stainless steel cleaning needles in nine diameters from .15 to .80 mm, two wire brushes, two tweezers, a carving knife with five replacement blades and a zippered tool bag. It targets hobbyists and small-shop operators who regularly clear nozzle blockages and finish printed parts.

Needle diameters limit nozzle compatibility

The supplied needles cover .15, .20, .25, .30, .35, .40, .50, .60 and .80 mm openings, so nozzles outside this range cannot be serviced with the included pins. Brush bristles and tweezers address external residue only and do not reach inside channels smaller than the smallest needle.

Thirty-one needles in nine sizes

The kit provides 31 needles distributed across the nine stated diameters, giving multiple spares for the most common .35 and .40 mm sizes while larger and smaller diameters receive only one or two pieces each.

Helstu kostir

  • 42-piece kit covers every nozzle maintenance task
  • 31 stainless needles in 9 sizes from .15 to .80 mm clear most clogs
  • Carving knife with 5 spare blades removes print burrs fast
  • Copper and stainless wire brushes scrub hot-end residue clean
  • Straight and curved tweezers reach awkward nozzle angles

Tæknilýsing

BrandTIOPY
ModelS-TOOL KIT
Part NumberS-TOOL KIT
ColorMulti-color
TypeS-TOOL KIT

Spurningar um þessa vöru

Which needle sizes in the 42-piece kit cover the common 0.4 mm nozzle?

The kit includes ten 0.40 × 50 mm needles plus ten 0.35 × 40 mm and two 0.30 × 60 mm needles for slightly smaller orifices.

How do the 0.35 mm and 0.40 mm needles behave when clearing a real 0.4 mm nozzle?

The 0.40 mm needles match the bore exactly while the 0.35 mm needles pass through with a small clearance for stubborn clogs.

Are the needles compatible with the Bambu Lab AD5X hotend threading?

The needles are plain stainless-steel pins sized 0.15–0.80 mm and are used by hand; they do not thread into the hotend.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.