Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular silver metal server PSU with fan grille and 20+4 pin connector

TOPOWER

TOPOWER TOP-250W1U 250W server power supply

SKU CH-AN6B-DVKFW MPN TOP-250W1U

A 250 W ATX server power supply with a 20+4 pin connector, 100-240 V input and 1.57 x 3.94 x 7.87 in dimensions

  • TypeATX
  • Single/RedundantSingle
  • Maximum Power250W
  • Main Connector20+4Pin
  • Output Current+3.3V@18A, +5V@16A, +12V@16A, [email protected] , [email pro
  • Input Voltage100 - 240 V
  • Delivers 250 W maximum power for server workloads
  • Single-unit design simplifies rack installation and maintenance
  • ATX 20+4-pin main connector fits standard server boards
  • Wide 100–240 V input handles global voltage ranges
  • Compact 1.57″ × 3.94″ × 7.87″ form factor fits 1U chassis

250W ATX server power supply

The TOPOWER TOP-250W1U is a single 250W ATX unit built for 1U server chassis. It delivers power through a standard 20+4Pin main connector and accepts a universal 100 - 240 V input. This supply suits administrators maintaining legacy rack systems or low-density compute nodes.

12V rail rated at 16A

The +12V line provides 16A while the +3.3V and +5V rails offer 18A and 16A respectively. Combined output reaches 250W, giving headroom for a single CPU and a modest drive count. Heavy GPU workloads or multi-socket configurations will exceed the available 12V current.

Replaces failed 250W 1U units

This model directly replaces an equivalent 250W ATX server supply with the same 20+4Pin connector and 1.57" height. The jump is worth it when the original unit has failed or when a spare is needed for cold-standby redundancy. Builders needing redundant hot-swap modules or higher 12V capacity must look elsewhere.

Helstu kostir

  • Delivers 250 W maximum power for server workloads
  • Single-unit design simplifies rack installation and maintenance
  • ATX 20+4-pin main connector fits standard server boards
  • Wide 100–240 V input handles global voltage ranges
  • Compact 1.57″ × 3.94″ × 7.87″ form factor fits 1U chassis

Tæknilýsing

BrandTOPOWER
ModelTOP-250W1U
TypeATX
Single/RedundantSingle
Maximum Power250W
Main Connector20+4Pin
Output Current+3.3V@18A, +5V@16A, +12V@16A, [email protected] , [email protected] , [email protected]
Input Voltage100 - 240 V
Dimensions1.57" x 3.94" x 7.87"(H x W x L)
Sendingarþyngd1.18 kg
Stærð sendingar262 × 185 × 86 mm

Spurningar um þessa vöru

Will the 20+4Pin main connector on the TOPOWER TOP-250W1U fit an older motherboard that only has a 20-pin socket?

Yes, the 20+4Pin connector splits so the 20-pin portion plugs directly into a 20-pin motherboard socket while the extra 4 pins hang unused.

How can I verify the TOP-250W1U is delivering the rated +12V@16A after installation?

Measure the +12V rail with a multimeter under load; it should read close to 12V while the system draws up to 16A on that rail.

Does the TOP-250W1U include mounting screws or a power cord, or must I buy them separately?

The supplied specifications list only the power supply unit itself; mounting screws and an IEC power cord are not included and must be sourced separately.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.