Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular metal crypto miner unit with integrated power supply, matte grey finish, front fan grille visible

TROUVER

TROUVER Antminer S19 86TH/S SHA-256 Mining Hardware

SKU CH-0T6M-9KDA4

SHA-256 miner delivering 86Th/s at 2942W with included power supply, requiring 220V input

  • 86Th/s SHA-256 hashrate for high Bitcoin mining throughput
  • 2942W power draw enables efficient energy cost planning
  • 220V input requirement ensures stable operation with correct supply
  • New firmware accelerates start-up and improves control stability
  • Mines Bitcoin, Peercoin, Curecoin and other SHA-256 coins

TROUVER Antminer S19 86TH/S SHA-256 Miner

This TROUVER Antminer S19 delivers a maximum hashrate of 86Th/s on the SHA-256 algorithm while drawing 2942W of power. It is built for operators who run dedicated mining infrastructure and can supply the required 220V input. The unit ships new with a power supply included.

Suited for 220V facilities mining Bitcoin

The hardware mines Bitcoin (BTC), Joulecoin (XJO), Peercoin (PPC), eMark (DEM), Acoin (ACOIN), Curecoin (CURE), Unbreakable (UNB), Crown (CRW), Terracoin (TRC) and others. It is not suitable for sites limited to lower mains voltages; incorrect input voltage will likely damage the miner. Operators without 220V service should consider other equipment.

Sustained load behaviour with updated firmware

The new firmware design enables faster start-up, more stable performance and a more efficient control mechanism during continuous operation. This stability improvement addresses issues seen in earlier S17 series units. The miner maintains its rated 86Th/s output under constant load when powered correctly at 220V.

Helstu kostir

  • 86Th/s SHA-256 hashrate for high Bitcoin mining throughput
  • 2942W power draw enables efficient energy cost planning
  • 220V input requirement ensures stable operation with correct supply
  • New firmware accelerates start-up and improves control stability
  • Mines Bitcoin, Peercoin, Curecoin and other SHA-256 coins

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

What input voltage must my facility provide for the Antminer S19 86Th to operate safely?

The unit requires a 220V supply. Applying the wrong voltage can damage the miner, so confirm your site delivers 220V before connecting the included power supply.

Will the Antminer S19 86Th share a 220V circuit with my older Antminer S9 units without tripping the breaker?

Each S19 86Th draws 2942W at the wall, far more than an S9. Plan dedicated 220V circuits for every S19; mixing them on the same breaker as older hardware will likely overload the circuit.

How can I verify the Antminer S19 86Th is hashing at the rated 86Th/s after power-up?

Log into the miner’s web dashboard or your pool’s worker page. A healthy unit will report a real-time hashrate near 86Th/s on the SHA-256 algorithm with stable temperature and fan readings.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.