Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
A small coil of red PLA filament in a clear tube

Unique-Bargains

Unique-Bargains PLA Filament Red 1.75mm 10m 35g 3d printers accessory

SKU CH-PNCE-ABMMT

Red PLA filament spool, 10 metres long with 1.75 millimetre diameter and ±0.02 millimetre accuracy for smooth, warp-free 3D printing

  • TypeTubes
  • Consistent layers from 1.75mm diameter with ±0.02mm precision
  • Smooth prints without bubbles or warping for clean finishes
  • Strong yet flexible filament resists snapping during long prints
  • Eco-friendly PLA sourced from renewable plant-based materials
  • Compact 10m spool weighs just 35g for easy handling

Short Sample for Testing

This 10 metre PLA filament spool weighs 35 grams and comes in red. It suits makers who want a small amount of material to trial a colour or finish a minor print without committing to a full kilogram roll.

Dimensional Accuracy Upgrade

The filament holds a 1.75 millimetre diameter with a tolerance of ±0.02 millimetres, tighter than the ±0.03 millimetre baseline often seen on budget reels. That precision reduces extruder skipping and improves layer consistency when the printer is calibrated for the tighter window.

Universal 1.75mm Fit

The spool works with any fused-deposition printer that accepts 1.75 millimetre PLA and does not require a heated bed. Its low shrinkage and good tensile strength mean it prints cleanly on stock machines, while the short length frees up storage space compared with bulk spools.

Helstu kostir

  • Consistent layers from 1.75mm diameter with ±0.02mm precision
  • Smooth prints without bubbles or warping for clean finishes
  • Strong yet flexible filament resists snapping during long prints
  • Eco-friendly PLA sourced from renewable plant-based materials
  • Compact 10m spool weighs just 35g for easy handling

Tæknilýsing

BrandUnique Bargains
TypeTubes

Spurningar um þessa vöru

What diameter and tolerance does the 1.75mm Red PLA filament have so it feeds through my extruder?

The filament is 1.75mm with a dimensional accuracy of +/- 0.02mm, matching the spec for standard 1.75mm systems.

How do I load this 10m loose coil without it tangling during the first print?

Secure the free end before cutting any zip ties, then feed it straight into the PTFE tube while keeping slight tension to prevent loops from forming.

When will this 35g sample run out and what should I order next?

At 10m length it suits small test prints; afterwards switch to a standard 1kg spool of 1.75mm PLA in the same Red colour for continuous printing.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.