Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black tower duplicator with 23 USB 3.0 ports and blue LCD display

VinPower

VinPower USBSHARK-23T-BK 1 to 23 USB duplicator 128M buffer

SKU CH-MPMB-QE95M MPN USBSHARK-23T-BK

Copies one USB flash drive to 23 targets simultaneously using 128 MB buffer and a 20 x 2 LCD, operating standalone with USB 3.0 ports

  • TypeUSB Flash Drive Duplicator
  • Target1 to 23
  • Buffer Memory128M
  • Display20 x 2 Blue LCD
  • Operating TypeStandalone
  • ConnectorUSB 3.0

Target 1 to 23

Yfirstrikaðar útgáfur eru til, en ekki til hér.

  • Standalone operation copies USB drives without a PC
  • Asynchronous duplication handles 23 targets independently
  • 128 MB buffer sustains high-speed transfers
  • USB 3.0 connector supports fast data rates
  • 20×2 blue LCD shows status at a glance

1-to-23 USB flash duplicator

The VinPower USBSHARK-23T-BK is a standalone USB 3.0 duplicator that copies one master drive to twenty-three targets simultaneously. It operates without a host computer and uses a 128M buffer to sustain asynchronous transfers. A 20 x 2 blue LCD reports progress on the black front panel.

IT teams and content distributors

Suits teams that need to provision large batches of USB flash drives in a single session and prefer a self-contained unit that plugs into 90 to 240 V AC mains. Not suited for users who only duplicate a few drives at a time or who require direct copying of internal storage media.

23 target ports decide capacity

The defining specification is the twenty-three target ports, which set the maximum batch size for each duplication run. If your workflow regularly exceeds that count you will need a larger tower; if it stays below, a smaller duplicator may be more cost-effective.

Helstu kostir

  • Standalone operation copies USB drives without a PC
  • Asynchronous duplication handles 23 targets independently
  • 128 MB buffer sustains high-speed transfers
  • USB 3.0 connector supports fast data rates
  • 20×2 blue LCD shows status at a glance

Tæknilýsing

BrandVINPOWER
ModelUSBSHARK-23T-BK
TypeUSB Flash Drive Duplicator
Target1 to 23
Buffer Memory128M
Display20 x 2 Blue LCD
Operating TypeStandalone
ConnectorUSB 3.0
Panel ColorBlack
Dimensions (H x W x D)15.00" x 7.50" x 21.00"
FeaturesComplete Standalone Operation:
No PC required to operate the duplicator.
Asynchronous Duplication:
Able to copy any size master data onto multiple sources asynchronously (independently) without sacrificing duplication speed or quality for faster and more reliable duplication.
Smart copy feature:
This feature is used to quickly copy all accessible content contained on the USB device.
Supports all data Formats with bit by bit duplication
Supports most currently available USB drive:
Supports most currently available USB drive in the market
Future functions upgradeable through firmware:
Power Supply90 - 240 V AC
Sendingarþyngd11.16 kg
Stærð sendingar660 × 533 × 330 mm

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How much bench space does the 15.00" x 7.50" x 21.00" tower need?

The unit measures 15.00 inches high, 7.50 inches wide and 21.00 inches deep, so allow at least that footprint plus clearance for the 23 front USB ports and rear power cable.

What is the correct way to start a copy job on the standalone LCD, and what step do users often skip?

Insert the source drive into the top port, insert up to 23 target drives, then press the Copy button on the 20 x 2 blue LCD menu; users often forget to verify the source is in the dedicated master slot before starting.

Which parts will need replacement after heavy use on this 23-port duplicator?

The 23 USB 3.0 front-panel ports and the internal 90–240 V AC power supply are the components most likely to wear out after extended high-volume duplication cycles.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.