Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black square 60mm case fan with three-pin connector

Zyvpee

Zyvpee 2406GL-04W-B59 T07 12V 0.26A 60x60x15mm case fan

SKU CH-1CD9-GVVWF

A 60 mm square DC cooler with ball bearing and 3-pin connector runs at 12 V 0.26 A

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesSquare DC Cooler
  • Ball bearing runs smoothly and quietly
  • 12 V 0.26 A keeps power draw low
  • 60 mm square frame fits tight spaces
  • 3-pin connector works with standard headers
  • Non-LED black finish suits any build

60 mm square DC cooler

This 60 mm square case fan uses a ball bearing and a three-pin power connector. It runs at 12 V and draws 0.26 A. The frame measures 60 by 60 by 15 mm and has no LED lighting. It is intended for system builders who need a compact airflow device for tight chassis spaces or small CPU coolers.

Installation notes

Mounting uses the standard four-corner holes found on 60 mm fans. The three-pin plug connects directly to a motherboard header or a fan controller. Polarity is fixed, so reversing the connector will prevent the fan from spinning. The thin 15 mm profile fits most low-clearance coolers, but verify screw-hole alignment before securing.

12 V 0.26 A power draw

The decisive specification is the 12 V 0.26 A rating, which determines whether your motherboard header or controller can supply enough current. Headers limited to lower amperage may not start the fan reliably. Builders who need PWM speed control or higher static pressure should look elsewhere, as this model provides only fixed-voltage operation.

Helstu kostir

  • Ball bearing runs smoothly and quietly
  • 12 V 0.26 A keeps power draw low
  • 60 mm square frame fits tight spaces
  • 3-pin connector works with standard headers
  • Non-LED black finish suits any build

Tæknilýsing

Series2406GL-04W-B59
Model2406GL-04W-B59
TypeCase Fan
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesSquare DC Cooler
Dimensions60*60*15mm

Spurningar um þessa vöru

How can I confirm the 2406GL-04W-B59 T07 fan is running correctly after connecting it to a 3‑pin header?

With the system powered on, verify the fan spins smoothly and the motherboard BIOS or monitoring software reports a stable RPM reading for the 3‑pin connector.

What comes in the box with the 60×60×15 mm ball‑bearing case fan and what must be purchased separately?

The package contains only the 12 V 0.26 A fan unit; mounting screws, fan filters or a 3‑pin extension cable are not included and must be sourced separately.

Which version of the NMB 6015 series should I choose for a 12 V 3‑pin CPU cooler slot?

Select the 2406GL-04W-B59 T07 model — it matches the 12 V 0.26 A rating and 3‑pin connector required for that header.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.