Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black 80 by 25 mm case fan with three wire connector

Zyvpee

Zyvpee 3110RL-05W-B69 C04 80x25mm 24V 0.22A 3 Pin Ball Bearing Case Fan

SKU CH-R520-JJTP8

80×25 mm ball-bearing case fan runs on 24 V 0.22 A via a three-pin connector for inverter cooling

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Ball bearing ensures long service life
  • 24 V 0.22 A three-pin power for inverter cooling
  • 80 mm by 25 mm fits standard case mounts
  • Non-LED black frame keeps build clean
  • NMB 3110RL-05W-B69 C04 model for reliable airflow

Zyvpee 80 mm Ball-Bearing Case Fan

The Zyvpee 3110RL-05W-B69 C04 is an 80 by 25 mm case fan built around a ball bearing for extended service life. It suits system builders who need a compact 24 V cooling device with a standard three-pin power connector. Buyers who require variable-speed PWM control or integrated lighting will need a different model.

Thermals, Noise and Power Draw

Rated at 24 V and 0.22 A, the fan draws modest power while delivering airflow for inverter cooling duties. The ball bearing maintains consistent rotation stability, which helps keep acoustic output predictable during continuous operation. No PWM signal wire is present, so speed remains fixed unless the host system regulates voltage on the three-pin header.

Build Quality and Daily Implications

Black plastic frame and blades give a neutral appearance that blends into most chassis interiors. The three-wire lead plugs directly into standard motherboard or fan-controller headers without adapters. Ball-bearing construction reduces wear compared with sleeve alternatives, supporting reliable long-term use in always-on or frequently cycled systems.

Helstu kostir

  • Ball bearing ensures long service life
  • 24 V 0.22 A three-pin power for inverter cooling
  • 80 mm by 25 mm fits standard case mounts
  • Non-LED black frame keeps build clean
  • NMB 3110RL-05W-B69 C04 model for reliable airflow

Tæknilýsing

BrandZyvpee
Series3110RL-05W-B69
Model3110RL-05W-B69
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesInverter Cooling
Dimensions80*25mm

Spurningar um þessa vöru

How do I mount the 80x25mm fan in my case and connect the 3-pin wire?

Line up the four screw holes on the 80x25mm frame with the case fan slots, fasten the screws, then plug the three-wire connector onto a 24V fan header.

What part of the 3110RL-05W-B69 C04 will wear out first and need replacement?

The ball bearing is the moving component; after extended running it will develop noise or play and the whole fan will need swapping.

Which limit appears first when the 24V 0.22A inverter-cooling fan runs continuously?

The ball bearing’s heat tolerance is the first ceiling; sustained operation pushes bearing temperature until lubricant breaks down.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.