Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black 80mm square case fan 15mm thick with two wires

Zyvpee

Zyvpee FSY81B12M 80x15mm 2-wire ball bearing case fan

SKU CH-HXAB-NGSDX

An 80×15 mm ball-bearing case fan running at 3000-3499 RPM with 25-30 dBA noise on a 2-wire 12 V connection

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • RPM3000-3499 RPM
  • Noise Level25 - 30 dBA
  • Power Connector2 Wires
  • Quiet operation at 25 to 30 dBA noise level
  • Ball bearing design for reliable long-term cooling
  • 12 V DC power with low 0.15 A current draw
  • Compact 80 by 15 mm frame fits tight case spaces
  • Two-wire connector for simple direct power connection

Compact 80 mm case fan for tight builds

This Zyvpee FSY81B12M measures 80 by 15 mm and runs on a 12 V two-wire connection. It targets builders fitting cooling into small-form-factor cases or replacing a slim rear exhaust where space is limited. The ball bearing and non-LED black frame keep the focus on function rather than lighting.

Steady airflow at 3000 to 3499 RPM

The fan spins continuously in the 3000 to 3499 RPM range while producing 25 to 30 dBA of noise. Ball-bearing construction supports consistent rotation during long sessions without the wear patterns seen in sleeve designs. The 0.15 A draw keeps power demand modest for a 12 V rail.

Verify 80 mm mounting and two-pin header

Check that your case or heatsink has 80 mm screw holes and 15 mm clearance for the frame thickness. Confirm the motherboard or controller offers a two-pin 12 V header, because this model lacks PWM or a third speed-sense wire. No adapter is included in the package.

Helstu kostir

  • Quiet operation at 25 to 30 dBA noise level
  • Ball bearing design for reliable long-term cooling
  • 12 V DC power with low 0.15 A current draw
  • Compact 80 by 15 mm frame fits tight case spaces
  • Two-wire connector for simple direct power connection

Tæknilýsing

SeriesFSY81B12M
ModelFSY81B12M
TypeCase Fan
CompatibilityCase
Bearing TypeBall
RPM3000-3499 RPM
Noise Level25 - 30 dBA
Power Connector2 Wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions80*15mm

Spurningar um þessa vöru

How loud is the FSY81B12M when it runs continuously at 3000–3499 RPM?

The fan produces 25–30 dBA at its rated speed range, which is a low hum suitable for quiet builds.

Does the 2-wire power connector on this 80×15 mm fan plug straight into a standard motherboard header?

It uses a bare 2-wire DC12V 0.15A connection; you need a compatible 2-pin header or an adapter to attach it to a typical 3- or 4-pin fan header.

Will the 80 mm frame and 15 mm depth fit alongside older 80 mm coolers that use sleeve bearings?

The dimensions match the classic 80×15 mm footprint, so it installs in the same mounting holes; the ball bearing simply lasts longer than sleeve types.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.