Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green 240-pin DDR3L server memory module with black chips and silver label

A-Tech

A-Tech 4GB DDR3L 1600 PC3L-12800 ECC RDIMM 1Rx8 1.35V Hynix HMT451R7AFR8A-PB Server Memory

SKU CH-A8SB-ZVT59

4GB DDR3L 1600 ECC registered server DIMM with 1.35V low-voltage operation and CL11 latency

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 4GB capacity expands server memory for heavier workloads
  • DDR3L 1600 speed delivers 12800 MB/s bandwidth
  • ECC registered design corrects data errors automatically
  • 35V low voltage reduces power draw and heat
  • 240-pin 1Rx8 form factor fits compatible DDR3L slots

4 GB DDR3L ECC RDIMM for servers

This 4 GB DDR3L 1600 ECC registered DIMM targets administrators upgrading or repairing compatible server and workstation platforms. It replaces several Hynix part numbers including HMT451R7AFR8A-PB and HMT451V7DFR8A-PB. The single-rank 1Rx8 module uses major-brand chips and operates at 1.35 V low voltage. Buyers who need higher capacity per slot or unbuffered memory should look elsewhere.

Low-voltage operation and registered buffering

Running at 1.35 V reduces power draw compared with standard DDR3 modules while the registered design lightens the electrical load on the memory controller. CL11 latency at DDR3L 1600 delivers stable throughput for typical server workloads. The module is tested for reliable operation under continuous use in multi-DIMM configurations.

240-pin DIMM form factor fits registered slots

The 240-pin DDR3 DIMM installs only in slots wired for registered ECC memory; it will not work in unbuffered desktop boards. One module occupies a single slot, leaving remaining channels available for further expansion. Verify the platform's qualified vendor list before installation to confirm supported speeds and population rules.

Privalumai

  • 4GB capacity expands server memory for heavier workloads
  • DDR3L 1600 speed delivers 12800 MB/s bandwidth
  • ECC registered design corrects data errors automatically
  • 35V low voltage reduces power draw and heat
  • 240-pin 1Rx8 form factor fits compatible DDR3L slots

Specifikacijos

BrandA-Tech
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Klausimai apie šią prekę

How do I install this DDR3L 240-pin ECC RDIMM and what step is often missed?

Align the module notch with the slot key, press firmly until both retention clips click, and verify the system BIOS recognises the registered ECC configuration at 1.35 V.

What maintenance or replacement will this 4 GB DDR3L 1600 module need later?

No scheduled maintenance is required; replace the module only if memory diagnostics report uncorrectable ECC errors or the system fails to POST with this DIMM installed.

What limit appears first when this CL11 1Rx8 RDIMM runs under sustained load?

The registered buffer and CL11 latency set the throughput ceiling at DDR3L 1600 (PC3L-12800), so sustained bandwidth cannot exceed that rated speed.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.