我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green 240-pin DDR3L server memory module with black chips and silver label

A-Tech

A-Tech 4GB DDR3L 1600 PC3L-12800 ECC RDIMM 1Rx8 1.35V Hynix HMT451R7AFR8A-PB Server Memory

SKU CH-A8SB-ZVT59

4GB DDR3L 1600 ECC registered server DIMM with 1.35V low-voltage operation and CL11 latency

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 4GB capacity expands server memory for heavier workloads
  • DDR3L 1600 speed delivers 12800 MB/s bandwidth
  • ECC registered design corrects data errors automatically
  • 35V low voltage reduces power draw and heat
  • 240-pin 1Rx8 form factor fits compatible DDR3L slots

4 GB DDR3L ECC RDIMM for servers

This 4 GB DDR3L 1600 ECC registered DIMM targets administrators upgrading or repairing compatible server and workstation platforms. It replaces several Hynix part numbers including HMT451R7AFR8A-PB and HMT451V7DFR8A-PB. The single-rank 1Rx8 module uses major-brand chips and operates at 1.35 V low voltage. Buyers who need higher capacity per slot or unbuffered memory should look elsewhere.

Low-voltage operation and registered buffering

Running at 1.35 V reduces power draw compared with standard DDR3 modules while the registered design lightens the electrical load on the memory controller. CL11 latency at DDR3L 1600 delivers stable throughput for typical server workloads. The module is tested for reliable operation under continuous use in multi-DIMM configurations.

240-pin DIMM form factor fits registered slots

The 240-pin DDR3 DIMM installs only in slots wired for registered ECC memory; it will not work in unbuffered desktop boards. One module occupies a single slot, leaving remaining channels available for further expansion. Verify the platform's qualified vendor list before installation to confirm supported speeds and population rules.

商品特色

  • 4GB capacity expands server memory for heavier workloads
  • DDR3L 1600 speed delivers 12800 MB/s bandwidth
  • ECC registered design corrects data errors automatically
  • 35V low voltage reduces power draw and heat
  • 240-pin 1Rx8 form factor fits compatible DDR3L slots

商品規格

BrandA-Tech
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

商品問答

How do I install this DDR3L 240-pin ECC RDIMM and what step is often missed?

Align the module notch with the slot key, press firmly until both retention clips click, and verify the system BIOS recognises the registered ECC configuration at 1.35 V.

What maintenance or replacement will this 4 GB DDR3L 1600 module need later?

No scheduled maintenance is required; replace the module only if memory diagnostics report uncorrectable ECC errors or the system fails to POST with this DIMM installed.

What limit appears first when this CL11 1Rx8 RDIMM runs under sustained load?

The registered buffer and CL11 latency set the throughput ceiling at DDR3L 1600 (PC3L-12800), so sustained bandwidth cannot exceed that rated speed.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。