Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Gold-coloured rectangular ASIC miner with two front fans

AFRNDK

AFRNDK Gold-shell Echo E-DG1M 3.4Gh/s 1800W mining hardware

SKU CH-6E0B-970Z3

ASIC miner delivering 3.4 Gh/s on Scrypt for LTC, DOGE and BEL at 1800 W with 50 dB air cooling

  • TypeMining Machine/Miner
  • Compatible CurrencyLTCDOGE,BEL
  • Mining HardwareASIC
  • Hashrate3.4Gh/s
  • Noise level50dB
  • Fan2
  • Efficient 3.4 Gh/s Scrypt mining for LTC, DOGE, BEL
  • 1800 W power draw needs a capable 110 V home circuit
  • Quiet 50 dB operation from dual fans suits living spaces
  • Air cooling keeps chips stable from 5 °C to 45 °C ambient
  • Ethernet link and 5–95 % humidity tolerance simplify setup

Gold-shell Echo E-DG1M ASIC Miner

The Gold-shell Echo E-DG1M is an ASIC miner built for Scrypt-based currencies such as Litecoin, Dogecoin and BEL. It delivers a rated hashrate of 3.4Gh/s while drawing 1800W from a 110V supply. The unit ships with an integrated power supply and connects via Ethernet for pool communication. It is intended for home or small-scale operators who can provide the required electrical circuit.

Sustained Load Behaviour

During continuous operation the miner maintains its 3.4Gh/s output at a steady 1800W draw. Two onboard fans keep internal temperatures within the rated 5 to 45 °C range, producing an acoustic level of 50dB. The chassis exhausts enough heat to raise ambient room temperature, so adequate ventilation is necessary for stable long-term running. Humidity tolerance spans 5 to 95 % non-condensing.

Build and Connectivity

The enclosure uses air cooling with dual fans mounted for front-to-rear airflow. A single Ethernet port provides the sole data link, simplifying network integration. The integrated PSU removes the need for an external power brick, but the 1800W load demands a dedicated 110V circuit rated for sustained current. No additional mounting hardware or specialised connectors are required beyond standard mains and RJ45 cabling.

Privalumai

  • Efficient 3.4 Gh/s Scrypt mining for LTC, DOGE, BEL
  • 1800 W power draw needs a capable 110 V home circuit
  • Quiet 50 dB operation from dual fans suits living spaces
  • Air cooling keeps chips stable from 5 °C to 45 °C ambient
  • Ethernet link and 5–95 % humidity tolerance simplify setup

Specifikacijos

BrandGold-shell
SeriesEDG1M
ModelE-DG1M
TypeMining Machine/Miner
Compatible CurrencyLTCDOGE,BEL
Mining HardwareASIC
Hashrate3.4Gh/s
Noise level50dB
Fan2
Power Consumption1800w

Klausimai apie šią prekę

How loud is the E-DG1M when it runs 24/7 at 50 dB?

The miner produces 50 dB of noise from its two fans, which is comparable to a quiet office and generally acceptable for a home environment if placed in a separate room.

What electrical circuit do I need to support the 1800 W power draw?

The unit requires a 110 V circuit capable of delivering 1800 W continuously; verify your home wiring and breaker can handle this sustained load before installation.

Will the Ethernet interface work with my existing router and older switches?

Yes, the Ethernet port connects to any standard router or switch; no special networking hardware is required beyond a typical wired LAN connection.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.