Micron Technology, Inc.
Micron Technology, Inc. MT4JTF12864AZ-1G4D1 1GB DDR3 1333 Desktop RAM
- 1GB
- DDR3 1333 (PC3 1060…
$28.99
0.00037494BTC
En stock
AFRNDK
AFRNDK Gold-shell Echo E-DG1M 3.4Gh/s 1800W mining hardware
ASIC miner delivering 3.4 Gh/s on Scrypt for LTC, DOGE and BEL at 1800 W with 50 dB air cooling
- TypeMining Machine/Miner
- Compatible CurrencyLTCDOGE,BEL
- Mining HardwareASIC
- Hashrate3.4Gh/s
- Noise level50dB
- Fan2
- Efficient 3.4 Gh/s Scrypt mining for LTC, DOGE, BEL
- 1800 W power draw needs a capable 110 V home circuit
- Quiet 50 dB operation from dual fans suits living spaces
- Air cooling keeps chips stable from 5 °C to 45 °C ambient
- Ethernet link and 5–95 % humidity tolerance simplify setup
Gold-shell Echo E-DG1M ASIC Miner
The Gold-shell Echo E-DG1M is an ASIC miner built for Scrypt-based currencies such as Litecoin, Dogecoin and BEL. It delivers a rated hashrate of 3.4Gh/s while drawing 1800W from a 110V supply. The unit ships with an integrated power supply and connects via Ethernet for pool communication. It is intended for home or small-scale operators who can provide the required electrical circuit.
Sustained Load Behaviour
During continuous operation the miner maintains its 3.4Gh/s output at a steady 1800W draw. Two onboard fans keep internal temperatures within the rated 5 to 45 °C range, producing an acoustic level of 50dB. The chassis exhausts enough heat to raise ambient room temperature, so adequate ventilation is necessary for stable long-term running. Humidity tolerance spans 5 to 95 % non-condensing.
Build and Connectivity
The enclosure uses air cooling with dual fans mounted for front-to-rear airflow. A single Ethernet port provides the sole data link, simplifying network integration. The integrated PSU removes the need for an external power brick, but the 1800W load demands a dedicated 110V circuit rated for sustained current. No additional mounting hardware or specialised connectors are required beyond standard mains and RJ45 cabling.
Points forts
- Efficient 3.4 Gh/s Scrypt mining for LTC, DOGE, BEL
- 1800 W power draw needs a capable 110 V home circuit
- Quiet 50 dB operation from dual fans suits living spaces
- Air cooling keeps chips stable from 5 °C to 45 °C ambient
- Ethernet link and 5–95 % humidity tolerance simplify setup
Caractéristiques
| Brand | Gold-shell |
|---|---|
| Series | EDG1M |
| Model | E-DG1M |
| Type | Mining Machine/Miner |
| Compatible Currency | LTCDOGE,BEL |
| Mining Hardware | ASIC |
| Hashrate | 3.4Gh/s |
| Noise level | 50dB |
| Fan | 2 |
| Power Consumption | 1800w |
Questions sur cet article
How loud is the E-DG1M when it runs 24/7 at 50 dB?
The miner produces 50 dB of noise from its two fans, which is comparable to a quiet office and generally acceptable for a home environment if placed in a separate room.
What electrical circuit do I need to support the 1800 W power draw?
The unit requires a 110 V circuit capable of delivering 1800 W continuously; verify your home wiring and breaker can handle this sustained load before installation.
Will the Ethernet interface work with my existing router and older switches?
Yes, the Ethernet port connects to any standard router or switch; no special networking hardware is required beyond a typical wired LAN connection.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
Kingston Technology Corp.
Kingston Technology Corp. KTD-DM8400A/512 512MB DDR2 desktop RAM
- 512MB
- CL4
$12.99
0.000168BTC
En stock
