Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Matte black TPV rubber tubing coil, 12.7 mm outer diameter

Alphacool

Alphacool AlphaTube TPV Tubing 12.7mm OD 7.6mm ID 3.3m Matte Black 1016779

SKU CH-PARV-J0J3H

TPV rubber tubing resists chemicals and handles −50 °C to +155 °C with 12.7 mm OD and 7.6 mm ID over 3.3 m

  • ColorBlack
  • FeaturesMany used for Alphacool Eisbaer Extreme Kits
  • TPV material resists acids, bases and external influences
  • Withstands -50 °C to 155 °C without warping
  • 7 mm OD and 7.6 mm ID fit standard fittings
  • 3 m length covers most custom-loop layouts
  • Designed for Alphacool Eisbaer Extreme kits

Tubing for custom liquid loops

Alphacool AlphaTube TPV tubing is a rubber hose designed for custom water-cooling builds. It uses a TPV compound of EPDM and PP that resists acids, bases and external influences better than standard PVC. The matte black finish gives a subtle velvet appearance. The 3.3 m length suits single-loop configurations.

Build quality and fitting compatibility

The hose operates from -50 °C to +155 °C without warping or obstructing flow. Its 12.7 mm outer diameter and 7.6 mm inner diameter match Alphacool HF TPV fittings, which are adapted for the material's high tensile strength. Standard compression fittings for the same dimensions also work. The tube is only slightly harder than PVC, so routing remains straightforward.

Thermals and flow stability

The TPV material endures higher temperatures than PVC while keeping the coolant path clear. No warping means consistent inner diameter and steady flow rates under normal loop temperatures. The rubber construction does not introduce pump noise or vibration. Power draw is unaffected because the tubing adds no electrical load.

Privalumai

  • TPV material resists acids, bases and external influences
  • Withstands -50 °C to 155 °C without warping
  • 7 mm OD and 7.6 mm ID fit standard fittings
  • 3 m length covers most custom-loop layouts
  • Designed for Alphacool Eisbaer Extreme kits

Specifikacijos

BrandAlphacool
Model1016779
Part Number1016779
ColorBlack
FeaturesMany used for Alphacool Eisbaer Extreme Kits

Klausimai apie šią prekę

What inner diameter does the 12.7 mm outer-diameter TPV tubing use for water-cooling loops?

The hose has a 7.6 mm inner diameter, matching standard 1/2 in. OD / 3/8 in. ID compression fittings used in custom loops.

What length of matte-black TPV tubing is supplied in the 3.3 m package?

You receive a single continuous 3.3 metre length of 12.7 mm OD tubing that can be cut to the exact runs your build requires.

How do you secure the TPV hose onto barbed or compression fittings without leaks?

Slide the hose over the barb until it seats against the collar, then tighten the compression ring by hand plus a quarter turn with a spanner; the TPV material grips firmly once clamped.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.