我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Matte black TPV rubber tubing coil, 12.7 mm outer diameter

Alphacool

Alphacool AlphaTube TPV Tubing 12.7mm OD 7.6mm ID 3.3m Matte Black 1016779

SKU CH-PARV-J0J3H

TPV rubber tubing resists chemicals and handles −50 °C to +155 °C with 12.7 mm OD and 7.6 mm ID over 3.3 m

  • ColorBlack
  • FeaturesMany used for Alphacool Eisbaer Extreme Kits
  • TPV material resists acids, bases and external influences
  • Withstands -50 °C to 155 °C without warping
  • 7 mm OD and 7.6 mm ID fit standard fittings
  • 3 m length covers most custom-loop layouts
  • Designed for Alphacool Eisbaer Extreme kits

Tubing for custom liquid loops

Alphacool AlphaTube TPV tubing is a rubber hose designed for custom water-cooling builds. It uses a TPV compound of EPDM and PP that resists acids, bases and external influences better than standard PVC. The matte black finish gives a subtle velvet appearance. The 3.3 m length suits single-loop configurations.

Build quality and fitting compatibility

The hose operates from -50 °C to +155 °C without warping or obstructing flow. Its 12.7 mm outer diameter and 7.6 mm inner diameter match Alphacool HF TPV fittings, which are adapted for the material's high tensile strength. Standard compression fittings for the same dimensions also work. The tube is only slightly harder than PVC, so routing remains straightforward.

Thermals and flow stability

The TPV material endures higher temperatures than PVC while keeping the coolant path clear. No warping means consistent inner diameter and steady flow rates under normal loop temperatures. The rubber construction does not introduce pump noise or vibration. Power draw is unaffected because the tubing adds no electrical load.

商品特色

  • TPV material resists acids, bases and external influences
  • Withstands -50 °C to 155 °C without warping
  • 7 mm OD and 7.6 mm ID fit standard fittings
  • 3 m length covers most custom-loop layouts
  • Designed for Alphacool Eisbaer Extreme kits

商品規格

BrandAlphacool
Model1016779
Part Number1016779
ColorBlack
FeaturesMany used for Alphacool Eisbaer Extreme Kits

商品問答

What inner diameter does the 12.7 mm outer-diameter TPV tubing use for water-cooling loops?

The hose has a 7.6 mm inner diameter, matching standard 1/2 in. OD / 3/8 in. ID compression fittings used in custom loops.

What length of matte-black TPV tubing is supplied in the 3.3 m package?

You receive a single continuous 3.3 metre length of 12.7 mm OD tubing that can be cut to the exact runs your build requires.

How do you secure the TPV hose onto barbed or compression fittings without leaks?

Slide the hose over the barb until it seats against the collar, then tighten the compression ring by hand plus a quarter turn with a spanner; the TPV material grips firmly once clamped.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。