Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Chrome G1/4 inch male-female extender fitting 20mm length

Alphacool

Alphacool Eiszapfen G1/4" Male-Female Extender 20mm Chrome 17257

SKU CH-ZXPA-220C8

A G1/4" male-to-female extender adds 20 mm of reach for tight liquid-cooling loops and ships with a durable chrome finish plus three coloured O-rings

  • TypeFittings

Color/Size 20mm Chrome

  • Extends G1/4" threads by 10 mm for easier routing
  • High-flow design maintains coolant velocity through the 20 mm extender
  • Durable chrome coating resists chipping and peeling over time
  • Includes three coloured O-rings for customisable loop aesthetics
  • Precision machining ensures leak-free seal on every connection

Precision Loop Spacing

This chrome-plated G1/4" male-to-female extender adds a 20 mm offset to a hard-to-reach quarter-inch thread. It is built for custom-loop builders who need a little extra reach without adding bulk. The high-flow internal channel keeps restriction low while the slim profile fits tight routing paths. Alphacool supplies one extender per pack.

Leak-Free Seal Durability

A special coating process bonds the chrome finish to the brass body so the colour resists chipping and peeling through repeated assembly cycles. Three coloured O-rings are included to match your loop aesthetic and can glow under UV light. The precision threads engage smoothly, reducing the risk of cross-threading during installation. No moving parts mean silent, maintenance-free operation.

20 mm Extension Length

This single figure decides whether the adapter solves your clearance problem or falls short. Measure the gap between the component port and the tubing run; if it is close to 20 mm the extender will bridge it cleanly. Builders needing a different offset should select another length from the Eiszapfen range.

Privalumai

  • Extends G1/4" threads by 10 mm for easier routing
  • High-flow design maintains coolant velocity through the 20 mm extender
  • Durable chrome coating resists chipping and peeling over time
  • Includes three coloured O-rings for customisable loop aesthetics
  • Precision machining ensures leak-free seal on every connection

Specifikacijos

TypeFittings

Kiti šio modelio variantai

Dar 2 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How do I install the G1/4" male-female extender without damaging the chrome coating?

Hand-tighten the male thread into the component first, then attach tubing or another fitting to the female side; use a soft cloth if tools are needed to avoid scratching the bonded chrome finish.

Will the three coloured O-rings supplied with the extender need periodic replacement?

The included O-rings are standard G1/4" seals; inspect them during loop maintenance and replace if they show cracking, flattening or coolant weeping.

At what point does the 20 mm extension length become a flow restriction in a high-flow loop?

The 10 mm thread engagement on each end adds minimal restriction; measurable pressure drop only appears when multiple extenders are chained in a high-flow circuit.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.