Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Chrome G1/4 inch male-to-female extender fitting, 10mm length

Alphacool

Alphacool Eiszapfen G1/4" Male-Female Extender 10mm Chrome (17255)

SKU CH-YZAD-P26JR

A G1/4" male-to-female extender adds 10 mm of reach for hard-to-access liquid-cooling ports and features a durable chrome finish with coloured O-rings included

  • TypeFittings

Color/Size 10mm Chrome

  • Extends G1/4" threads by 10mm for easier routing
  • Highflow design maintains unrestricted coolant circulation
  • Durable chrome coating resists chipping and peeling
  • Includes three coloured O-rings for custom accents
  • Precision machining ensures leak-free G1/4" connections

Precision Thread Extender

The Alphacool Eiszapfen G1/4" male-to-female extender adds 10mm of reach to a standard quarter-inch thread. It suits custom-loop builders who need to bridge a gap between a component and a fitting when the port sits too deep or is difficult to access. The chrome finish resists chipping through a specialised coating process.

Solves Clearance Conflicts

This adapter replaces the need for forced tubing bends or improvised spacers when a G1/4" port is recessed behind a bulkhead or motherboard tray. The jump is worth it whenever a direct connection would stress the tube or prevent a clean routing path. It does not help builders who need a different thread pitch or a rotary joint for angular alignment.

Hand-Tight Install

Installation requires only threading the male end into the existing port and the fitting into the female end; no tools are mandatory. The package includes three coloured O-ring sets for visual coordination. The main risk is over-tightening, which can damage the coating or strip the fine threads, so stop when the seal seats firmly.

Privalumai

  • Extends G1/4" threads by 10mm for easier routing
  • Highflow design maintains unrestricted coolant circulation
  • Durable chrome coating resists chipping and peeling
  • Includes three coloured O-rings for custom accents
  • Precision machining ensures leak-free G1/4" connections

Specifikacijos

TypeFittings

Kiti šio modelio variantai

Dar 2 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

What thread size does the 10 mm extender use to connect to my loop?

It uses standard G1/4-inch threads on both the male and female ends, so it screws directly into any G1/4 port or fitting.

How do I install the extender without damaging the chrome finish?

Hand-tighten the male thread into the component first, then tighten the female side onto your tubing fitting; avoid tools that can mar the coated surface.

When should I replace the O-rings supplied with this fitting?

Replace them if they become brittle, cracked, or if you see any coolant seepage at the joint during routine loop inspections.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.