Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Chrome G1/4 inch male-to-female extender fitting, 10mm length

Alphacool

Alphacool Eiszapfen G1/4" Male-Female Extender 10mm Chrome (17255)

SKU CH-YZAD-P26JR

A G1/4" male-to-female extender adds 10 mm of reach for hard-to-access liquid-cooling ports and features a durable chrome finish with coloured O-rings included

  • TypeFittings

Color/Size 10mm Chrome

  • Extends G1/4" threads by 10mm for easier routing
  • Highflow design maintains unrestricted coolant circulation
  • Durable chrome coating resists chipping and peeling
  • Includes three coloured O-rings for custom accents
  • Precision machining ensures leak-free G1/4" connections

Precision Thread Extender

The Alphacool Eiszapfen G1/4" male-to-female extender adds 10mm of reach to a standard quarter-inch thread. It suits custom-loop builders who need to bridge a gap between a component and a fitting when the port sits too deep or is difficult to access. The chrome finish resists chipping through a specialised coating process.

Solves Clearance Conflicts

This adapter replaces the need for forced tubing bends or improvised spacers when a G1/4" port is recessed behind a bulkhead or motherboard tray. The jump is worth it whenever a direct connection would stress the tube or prevent a clean routing path. It does not help builders who need a different thread pitch or a rotary joint for angular alignment.

Hand-Tight Install

Installation requires only threading the male end into the existing port and the fitting into the female end; no tools are mandatory. The package includes three coloured O-ring sets for visual coordination. The main risk is over-tightening, which can damage the coating or strip the fine threads, so stop when the seal seats firmly.

Puncte forte

  • Extends G1/4" threads by 10mm for easier routing
  • Highflow design maintains unrestricted coolant circulation
  • Durable chrome coating resists chipping and peeling
  • Includes three coloured O-rings for custom accents
  • Precision machining ensures leak-free G1/4" connections

Specificații

TypeFittings

Alte versiuni ale acestui model

2 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What thread size does the 10 mm extender use to connect to my loop?

It uses standard G1/4-inch threads on both the male and female ends, so it screws directly into any G1/4 port or fitting.

How do I install the extender without damaging the chrome finish?

Hand-tighten the male thread into the component first, then tighten the female side onto your tubing fitting; avoid tools that can mar the coated surface.

When should I replace the O-rings supplied with this fitting?

Replace them if they become brittle, cracked, or if you see any coolant seepage at the joint during routine loop inspections.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.