Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Chrome G1/4 inch male-to-female extender fitting, 10mm length

Alphacool

Alphacool Eiszapfen G1/4" Male-Female Extender 10mm Chrome (17255)

SKU CH-YZAD-P26JR

A G1/4" male-to-female extender adds 10 mm of reach for hard-to-access liquid-cooling ports and features a durable chrome finish with coloured O-rings included

  • TypeFittings

Color/Size 10mm Chrome

  • Extends G1/4" threads by 10mm for easier routing
  • Highflow design maintains unrestricted coolant circulation
  • Durable chrome coating resists chipping and peeling
  • Includes three coloured O-rings for custom accents
  • Precision machining ensures leak-free G1/4" connections

Precision Thread Extender

The Alphacool Eiszapfen G1/4" male-to-female extender adds 10mm of reach to a standard quarter-inch thread. It suits custom-loop builders who need to bridge a gap between a component and a fitting when the port sits too deep or is difficult to access. The chrome finish resists chipping through a specialised coating process.

Solves Clearance Conflicts

This adapter replaces the need for forced tubing bends or improvised spacers when a G1/4" port is recessed behind a bulkhead or motherboard tray. The jump is worth it whenever a direct connection would stress the tube or prevent a clean routing path. It does not help builders who need a different thread pitch or a rotary joint for angular alignment.

Hand-Tight Install

Installation requires only threading the male end into the existing port and the fitting into the female end; no tools are mandatory. The package includes three coloured O-ring sets for visual coordination. The main risk is over-tightening, which can damage the coating or strip the fine threads, so stop when the seal seats firmly.

Kohokohdat

  • Extends G1/4" threads by 10mm for easier routing
  • Highflow design maintains unrestricted coolant circulation
  • Durable chrome coating resists chipping and peeling
  • Includes three coloured O-rings for custom accents
  • Precision machining ensures leak-free G1/4" connections

Tekniset tiedot

TypeFittings

Tämän mallin muut versiot

2 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What thread size does the 10 mm extender use to connect to my loop?

It uses standard G1/4-inch threads on both the male and female ends, so it screws directly into any G1/4 port or fitting.

How do I install the extender without damaging the chrome finish?

Hand-tighten the male thread into the component first, then tighten the female side onto your tubing fitting; avoid tools that can mar the coated surface.

When should I replace the O-rings supplied with this fitting?

Replace them if they become brittle, cracked, or if you see any coolant seepage at the joint during routine loop inspections.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.