Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Chrome G1/4 inch male-to-female extender fitting, 10mm length

Alphacool

Alphacool Eiszapfen G1/4" Male-Female Extender 10mm Chrome (17255)

SKU CH-YZAD-P26JR

A G1/4" male-to-female extender adds 10 mm of reach for hard-to-access liquid-cooling ports and features a durable chrome finish with coloured O-rings included

  • TypeFittings

Color/Size 10mm Chrome

  • Extends G1/4" threads by 10mm for easier routing
  • Highflow design maintains unrestricted coolant circulation
  • Durable chrome coating resists chipping and peeling
  • Includes three coloured O-rings for custom accents
  • Precision machining ensures leak-free G1/4" connections

Precision Thread Extender

The Alphacool Eiszapfen G1/4" male-to-female extender adds 10mm of reach to a standard quarter-inch thread. It suits custom-loop builders who need to bridge a gap between a component and a fitting when the port sits too deep or is difficult to access. The chrome finish resists chipping through a specialised coating process.

Solves Clearance Conflicts

This adapter replaces the need for forced tubing bends or improvised spacers when a G1/4" port is recessed behind a bulkhead or motherboard tray. The jump is worth it whenever a direct connection would stress the tube or prevent a clean routing path. It does not help builders who need a different thread pitch or a rotary joint for angular alignment.

Hand-Tight Install

Installation requires only threading the male end into the existing port and the fitting into the female end; no tools are mandatory. The package includes three coloured O-ring sets for visual coordination. The main risk is over-tightening, which can damage the coating or strip the fine threads, so stop when the seal seats firmly.

Erősségek

  • Extends G1/4" threads by 10mm for easier routing
  • Highflow design maintains unrestricted coolant circulation
  • Durable chrome coating resists chipping and peeling
  • Includes three coloured O-rings for custom accents
  • Precision machining ensures leak-free G1/4" connections

Műszaki adatok

TypeFittings

A modell további verziói

2 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

What thread size does the 10 mm extender use to connect to my loop?

It uses standard G1/4-inch threads on both the male and female ends, so it screws directly into any G1/4 port or fitting.

How do I install the extender without damaging the chrome finish?

Hand-tighten the male thread into the component first, then tighten the female side onto your tubing fitting; avoid tools that can mar the coated surface.

When should I replace the O-rings supplied with this fitting?

Replace them if they become brittle, cracked, or if you see any coolant seepage at the joint during routine loop inspections.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.