Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Chrome G1/4 inch male-to-female extender fitting, 10mm length

Alphacool

Alphacool Eiszapfen G1/4" Male-Female Extender 10mm Chrome (17255)

SKU CH-YZAD-P26JR

A G1/4" male-to-female extender adds 10 mm of reach for hard-to-access liquid-cooling ports and features a durable chrome finish with coloured O-rings included

  • TypeFittings

Color/Size 10mm Chrome

  • Extends G1/4" threads by 10mm for easier routing
  • Highflow design maintains unrestricted coolant circulation
  • Durable chrome coating resists chipping and peeling
  • Includes three coloured O-rings for custom accents
  • Precision machining ensures leak-free G1/4" connections

Precision Thread Extender

The Alphacool Eiszapfen G1/4" male-to-female extender adds 10mm of reach to a standard quarter-inch thread. It suits custom-loop builders who need to bridge a gap between a component and a fitting when the port sits too deep or is difficult to access. The chrome finish resists chipping through a specialised coating process.

Solves Clearance Conflicts

This adapter replaces the need for forced tubing bends or improvised spacers when a G1/4" port is recessed behind a bulkhead or motherboard tray. The jump is worth it whenever a direct connection would stress the tube or prevent a clean routing path. It does not help builders who need a different thread pitch or a rotary joint for angular alignment.

Hand-Tight Install

Installation requires only threading the male end into the existing port and the fitting into the female end; no tools are mandatory. The package includes three coloured O-ring sets for visual coordination. The main risk is over-tightening, which can damage the coating or strip the fine threads, so stop when the seal seats firmly.

Priekšrocības

  • Extends G1/4" threads by 10mm for easier routing
  • Highflow design maintains unrestricted coolant circulation
  • Durable chrome coating resists chipping and peeling
  • Includes three coloured O-rings for custom accents
  • Precision machining ensures leak-free G1/4" connections

Specifikācijas

TypeFittings

Citas šī modeļa versijas

Vēl 2 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What thread size does the 10 mm extender use to connect to my loop?

It uses standard G1/4-inch threads on both the male and female ends, so it screws directly into any G1/4 port or fitting.

How do I install the extender without damaging the chrome finish?

Hand-tighten the male thread into the component first, then tighten the female side onto your tubing fitting; avoid tools that can mar the coated surface.

When should I replace the O-rings supplied with this fitting?

Replace them if they become brittle, cracked, or if you see any coolant seepage at the joint during routine loop inspections.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.