Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Rectangular metal mining unit with integrated power supply, matte grey finish, front intake and rear exhaust vents

Antminer

Antminer S19 82 TH/s SHA-256 Mining Hardware with PSU

SKU CH-V21W-ADKZH

SHA-256 ASIC miner delivering 82 TH/s at 2829 W with 34 J/TH efficiency, includes PSU for 200–240 V input

  • SHA-256 mining for Bitcoin and BCH at 82 TH/s
  • Wall power draw of 2829 W at 25 °C
  • Efficiency of 34 J/TH measured at the wall
  • AC input range 200–240 V, requires 220 V supply
  • New condition, includes power supply unit

Antminer S19 82 TH/s SHA-256 Miner

This Antminer S19 is an application-specific integrated circuit miner built for the SHA-256 algorithm used by Bitcoin and Bitcoin Cash. It delivers a nominal hashrate of 82 TH/s with a tolerance of ±3% while drawing approximately 2829 W at the wall at 25 °C ambient temperature. The unit ships with its required power supply included.

Voltage 200–240 V AC input requirement

The hardware operates on an AC input range of 200 V to 240 V and the supplier notes that the miner requires 220 V service; incorrect input voltage may damage the device. It suits operators who have access to suitable high-voltage circuits and adequate cooling for a 34 J/TH efficiency rating. It is not for sites limited to lower residential voltages or for anyone mining algorithms other than SHA-256.

Power efficiency 34 J/TH at wall

The decisive specification is the power efficiency of 34 J/TH measured at the wall under 25 °C conditions with a ±5% variance. This figure determines whether the unit meets a miner's cost-to-hash target given local electricity rates and thermal capacity.

Privalumai

  • SHA-256 mining for Bitcoin and BCH at 82 TH/s
  • Wall power draw of 2829 W at 25 °C
  • Efficiency of 34 J/TH measured at the wall
  • AC input range 200–240 V, requires 220 V supply
  • New condition, includes power supply unit

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

How do I connect the Antminer S19 82 TH/s to a 220 V supply without damaging the unit?

Feed the PSU only 200–240 V AC; the supplier notes that any other input voltage may damage the miner.

What routine care will the Antminer S19 82 TH/s require after months of operation?

Clean dust from the intake and exhaust vents regularly so the 2829 W draw at 25 °C stays within the 34 J/TH efficiency window.

At what point does heat become the limiting factor during continuous mining?

The 2829 W wall power at 25 °C ambient means thermal throttling appears first if inlet air rises above 25 °C or airflow is restricted.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.