Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Rectangular metal mining unit with integrated power supply, matte grey finish, front intake and rear exhaust vents

Antminer

Antminer S19 82 TH/s SHA-256 Mining Hardware with PSU

SKU CH-V21W-ADKZH

SHA-256 ASIC miner delivering 82 TH/s at 2829 W with 34 J/TH efficiency, includes PSU for 200–240 V input

  • SHA-256 mining for Bitcoin and BCH at 82 TH/s
  • Wall power draw of 2829 W at 25 °C
  • Efficiency of 34 J/TH measured at the wall
  • AC input range 200–240 V, requires 220 V supply
  • New condition, includes power supply unit

Antminer S19 82 TH/s SHA-256 Miner

This Antminer S19 is an application-specific integrated circuit miner built for the SHA-256 algorithm used by Bitcoin and Bitcoin Cash. It delivers a nominal hashrate of 82 TH/s with a tolerance of ±3% while drawing approximately 2829 W at the wall at 25 °C ambient temperature. The unit ships with its required power supply included.

Voltage 200–240 V AC input requirement

The hardware operates on an AC input range of 200 V to 240 V and the supplier notes that the miner requires 220 V service; incorrect input voltage may damage the device. It suits operators who have access to suitable high-voltage circuits and adequate cooling for a 34 J/TH efficiency rating. It is not for sites limited to lower residential voltages or for anyone mining algorithms other than SHA-256.

Power efficiency 34 J/TH at wall

The decisive specification is the power efficiency of 34 J/TH measured at the wall under 25 °C conditions with a ±5% variance. This figure determines whether the unit meets a miner's cost-to-hash target given local electricity rates and thermal capacity.

Najważniejsze cechy

  • SHA-256 mining for Bitcoin and BCH at 82 TH/s
  • Wall power draw of 2829 W at 25 °C
  • Efficiency of 34 J/TH measured at the wall
  • AC input range 200–240 V, requires 220 V supply
  • New condition, includes power supply unit

Specyfikacja

Na razie brak opublikowanej specyfikacji tego produktu.

Pytania dotyczące tego produktu

How do I connect the Antminer S19 82 TH/s to a 220 V supply without damaging the unit?

Feed the PSU only 200–240 V AC; the supplier notes that any other input voltage may damage the miner.

What routine care will the Antminer S19 82 TH/s require after months of operation?

Clean dust from the intake and exhaust vents regularly so the 2829 W draw at 25 °C stays within the 34 J/TH efficiency window.

At what point does heat become the limiting factor during continuous mining?

The 2829 W wall power at 25 °C ambient means thermal throttling appears first if inlet air rises above 25 °C or airflow is restricted.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.