Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black compact metal power supply unit with modular cable sockets and a small rear fan grille

APEVIA CORP.

APEVIA CORP. ITX-PFC500W 500W Fully Modular Mini ITX Power Supply

SKU CH-JYGA-1NNGA

A 500W fully modular Mini ITX power supply with active PFC, multiple protections and a 40mm double ball bearing fan

  • TypeMini ITX
  • Fully modular design simplifies cable routing in compact builds
  • 500 W maximum output supports mid-range GPUs and CPUs
  • Active PFC accepts 90–264 V input for worldwide use
  • 40 mm double ball-bearing fan delivers forced-air cooling
  • Five protection circuits guard against overvoltage, overload, overcurrent, overheating and short circuits

ITX 500 W Fully Modular PSU

The APEVIA ITX-PFC500W delivers 500 W from a Mini ITX form factor with full-range active PFC rated 90-264 V. Its fully modular cable set lets builders connect only the leads their small-form-factor system requires. Designed for compact desktop, POS, AIO or server chassis where standard ATX units will not fit.

Check Clearance and Connector Needs

Verify that your case accepts a Mini ITX power supply and that the 40 mm double ball-bearing fan has an unobstructed airflow path. Ensure the motherboard uses a 20-pin or 24-pin main connector and a 4-pin or 8-pin 12 V CPU connector. The unit provides two 6+2-pin PCIe leads, two SATA plugs and two 4-pin peripheral plugs — confirm those match your drives and graphics card.

Modular Cables and Protections Included

The box contains a power cord and the full modular cable kit: 20+4-pin main, 8-pin (4+4) CPU, two 6+2-pin PCIe, two SATA and two 4-pin peripheral cables. Built-in protections cover overvoltage, overload, overcurrent, overheating and short circuit. Voltage regulation stays within 5 % on the 3.3 V, 5 V and 12 V rails.

Privalumai

  • Fully modular design simplifies cable routing in compact builds
  • 500 W maximum output supports mid-range GPUs and CPUs
  • Active PFC accepts 90–264 V input for worldwide use
  • 40 mm double ball-bearing fan delivers forced-air cooling
  • Five protection circuits guard against overvoltage, overload, overcurrent, overheating and short circuits

Specifikacijos

TypeMini ITX

Klausimai apie šią prekę

Does the retail box include all cables for a small-form-factor build, or must any be purchased separately?

The box contains the unit, a power cord, one 20+4 pin main connector, one 8-pin 12V (P4+4) connector, two 6+2 PCIe connectors, two SATA connectors and two 4-pin peripheral connectors. Every listed cable is included.

How do I decide between the single 500 W model and a different capacity?

Only the 500 W version is offered. It delivers +12 V at 33 A, +5 V at 14 A and +3.3 V at 12 A. Choose it if those rails meet your component power budget.

What does the 500 W rating mean once the PSU is installed in a Mini-ITX case?

The 500 W figure is the maximum combined output across all rails. The +12 V rail supplies up to 33 A for CPU and graphics, while the 5 % voltage tolerance keeps output stable under load in a compact chassis.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.