Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

AUBEAMTO

AUBEAMTO E01 USB 3.0 to IDE and SATA Hard Drive Adapter

SKU CH-61HF-KPP1F MPN E01

Connects 2.5/3.5 SATA, 2.5/3.5 IDE and 5.25 optical drives via USB 3.0 with a 12V 2A power adapter and one-touch backup

Model E01

  • Connect 2.5 and 3.5 inch SATA or IDE drives via USB 3.0
  • Access 5.25 inch optical drives including DVD-RW and CD-ROM
  • Transfer data at up to 5Gbps with USB 3.0 backward compatibility
  • Power 3.5 inch drives using included 12V 2A adapter and 4-pin cable
  • Protect drives with on/off switch and monitor status via LED indicator

Universal 2.5/3.5 Drive Adapter

The AUBEAMTO E01 is a USB 3.0 to IDE and SATA hard drive adapter kit that connects 2.5" or 3.5" SATA HDDs, SSDs and IDE HDDs plus 5.25" optical drives to a computer through a single USB port. It includes a 12V/2A power adapter and a 4-pin power cable for drives that need external power.

Suits archive and recovery tasks

This adapter suits technicians and hobbyists who need to read old IDE or SATA drives, clone disks, recover data or back up files without installing drives internally. It is not suited for permanent installation inside a chassis or for users needing internal mounting brackets. Optical drive support is limited to legacy 5.25" CD and DVD units.

6 TB capacity ceiling and USB 3.0 link

The adapter supports drives up to 6 TB and transfers data at up to 5Gbps via USB 3.0, with backward compatibility to USB 2.0 and 1.1. An on/off power switch and LED indicators protect connected drives during hot-swap operations.

Privalumai

  • Connect 2.5 and 3.5 inch SATA or IDE drives via USB 3.0
  • Access 5.25 inch optical drives including DVD-RW and CD-ROM
  • Transfer data at up to 5Gbps with USB 3.0 backward compatibility
  • Power 3.5 inch drives using included 12V 2A adapter and 4-pin cable
  • Protect drives with on/off switch and monitor status via LED indicator

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Kiti šio modelio variantai

Dar 3 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How do I install the AUBEAMTO E01 adapter for a 3.5 inch IDE hard drive?

Connect the 4-pin power cable and the 12V 2A power adapter to the drive, plug the USB 3.0 cable into the computer, then turn on the power switch on the IDE adapter as the final step.

What maintenance or replacement will the AUBEAMTO E01 adapter need over time?

The 12V 2A power adapter and the 4-pin power cable may need replacement if they become damaged or lose connection reliability after extended use.

What is the first limit I will hit when transferring large amounts of data continuously?

The USB 3.0 interface caps sustained transfer at 5Gbps, and actual speed will be limited by the connected drive's own maximum throughput.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.