Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black rectangular adapter with SATA and IDE connectors, USB 3.0 cable, power adapter and 4-pin power cable

AUBEAMTO

AUBEAMTO E01 USB 3.0 to IDE and SATA Hard Drive Adapter

SKU CH-61HF-KPP1F MPN E01

Connects 2.5/3.5 SATA, 2.5/3.5 IDE and 5.25 optical drives via USB 3.0 with a 12V 2A power adapter and one-touch backup

Model E01

  • Connect 2.5 and 3.5 inch SATA or IDE drives via USB 3.0
  • Access 5.25 inch optical drives including DVD-RW and CD-ROM
  • Transfer data at up to 5Gbps with USB 3.0 backward compatibility
  • Power 3.5 inch drives using included 12V 2A adapter and 4-pin cable
  • Protect drives with on/off switch and monitor status via LED indicator

Universal 2.5/3.5 Drive Adapter

The AUBEAMTO E01 is a USB 3.0 to IDE and SATA hard drive adapter kit that connects 2.5" or 3.5" SATA HDDs, SSDs and IDE HDDs plus 5.25" optical drives to a computer through a single USB port. It includes a 12V/2A power adapter and a 4-pin power cable for drives that need external power.

Suits archive and recovery tasks

This adapter suits technicians and hobbyists who need to read old IDE or SATA drives, clone disks, recover data or back up files without installing drives internally. It is not suited for permanent installation inside a chassis or for users needing internal mounting brackets. Optical drive support is limited to legacy 5.25" CD and DVD units.

6 TB capacity ceiling and USB 3.0 link

The adapter supports drives up to 6 TB and transfers data at up to 5Gbps via USB 3.0, with backward compatibility to USB 2.0 and 1.1. An on/off power switch and LED indicators protect connected drives during hot-swap operations.

Helstu kostir

  • Connect 2.5 and 3.5 inch SATA or IDE drives via USB 3.0
  • Access 5.25 inch optical drives including DVD-RW and CD-ROM
  • Transfer data at up to 5Gbps with USB 3.0 backward compatibility
  • Power 3.5 inch drives using included 12V 2A adapter and 4-pin cable
  • Protect drives with on/off switch and monitor status via LED indicator

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Aðrar útgáfur af þessari vöru

3 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How do I install the AUBEAMTO E01 adapter for a 3.5 inch IDE hard drive?

Connect the 4-pin power cable and the 12V 2A power adapter to the drive, plug the USB 3.0 cable into the computer, then turn on the power switch on the IDE adapter as the final step.

What maintenance or replacement will the AUBEAMTO E01 adapter need over time?

The 12V 2A power adapter and the 4-pin power cable may need replacement if they become damaged or lose connection reliability after extended use.

What is the first limit I will hit when transferring large amounts of data continuously?

The USB 3.0 interface caps sustained transfer at 5Gbps, and actual speed will be limited by the connected drive's own maximum throughput.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.