Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green rectangular SoDIMM module with gold edge connector and black memory chips

Axiom

Axiom 16GB DDR4 2933MHz ECC SoDIMM CL21 1.20V desktop RAM

SKU CH-ECMS-536B3

16 GB DDR4 ECC SoDIMM running at 2933 MHz with CL21 latency and 1.20 V operation

  • 16 GB capacity for demanding workloads
  • DDR4 2933 MHz speed for responsive performance
  • ECC support protects data integrity
  • CL21 latency balances speed and stability
  • 20 V operation reduces power consumption

16 GB DDR4-2933 ECC SoDIMM

This 16 GB DDR4 module runs at 2933 MHz with a CAS latency of CL21 and operates at 1.20 V. It uses the 260-pin SoDIMM form factor and includes on-board error-correcting code for data integrity. The part is RoHS certified and sold in new condition.

ECC and SoDIMM form factor

Error-correcting code detects and corrects single-bit errors to reduce silent data corruption in workloads that cannot tolerate faults. The 260-pin SoDIMM layout fits only slots wired for this smaller outline, so it cannot be used in standard full-size DIMM sockets.

DDR4-2933 speed ceiling

The DDR4-2933 standard caps transfer rates at 23466 MB/s, limiting bandwidth for memory-intensive tasks that scale with higher clock speeds. Systems locked to lower memory multipliers will run this module at reduced frequencies, and platforms that require non-ECC memory will not recognise the ECC function.

Privalumai

  • 16 GB capacity for demanding workloads
  • DDR4 2933 MHz speed for responsive performance
  • ECC support protects data integrity
  • CL21 latency balances speed and stability
  • 20 V operation reduces power consumption

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

Will the ECC SoDIMM need any firmware updates or periodic replacement?

The module is a standard DDR4 ECC SoDIMM with no firmware; it runs until a memory error or physical failure occurs.

What limit appears first when the 16 GB stick runs at 2933 MHz continuously?

The CAS latency of CL21 and 1.20 V voltage set the timing and thermal envelope under sustained load.

How much heat and noise does the 1.20 V DDR4 module add during all-day operation?

It produces only passive heat from the DRAM chips and zero noise since there are no moving parts.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.