Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Gray thermal paste syringe 2.5g Bitspower Baircool TP-1

Bitspower

Bitspower Baircool TP-1 Thermal Paste 2.5g

SKU CH-SWP4-TKTJE

Thermal compound with 6.5 W/m-K conductivity spreads easily, needs no burn-in, and is non-conductive

  • High thermal conductivity of 6.5 W/m-K for efficient heat transfer
  • Low thermal impedance of .009 K-in2/W reduces CPU temperatures
  • Non-silicone formula is non-corrosive and non-electrically conductive for safe application
  • Easy to spread evenly with no burn-in time required
  • Stable viscosity under 600000 CPS with no special storage conditions needed

Bitspower Baircool TP-1 Thermal Paste

This non-silicone thermal compound delivers a thermal conductivity of 6.5 W/m-K and a thermal impedance of 0.009 K-in2/W. It spreads easily and evenly without requiring special storage conditions. The gray grease is non-corrosive, non-electrically conductive, and requires no burn-in time. It offers excellent long-term stability with low dry-out characteristics.

Builders needing reliable CPU or GPU heat transfer

The 2.5 g syringe suits standard desktop processor applications and routine maintenance. Users requiring electrically conductive paste or larger volumes for multiple builds should look elsewhere. The compound is not intended for sub-ambient cooling scenarios or extreme overclocking setups demanding specialised liquid-metal interfaces. It also lacks specific certifications for industrial or server-grade validation.

2.5 g capacity covers several standard applications

A typical CPU installation uses a pea-sized drop, so the syringe provides enough material for multiple reseats or a small batch of builds. Viscosity below 600,000 CPS ensures consistent spreading without excessive force. The dielectric strength of 0.9 KV/mm confirms electrical isolation for safe use around exposed components. Specific gravity of 2.5 g/cm3 indicates a dense, stable paste that resists pump-out over time.

Privalumai

  • High thermal conductivity of 6.5 W/m-K for efficient heat transfer
  • Low thermal impedance of .009 K-in2/W reduces CPU temperatures
  • Non-silicone formula is non-corrosive and non-electrically conductive for safe application
  • Easy to spread evenly with no burn-in time required
  • Stable viscosity under 600000 CPS with no special storage conditions needed

Specifikacijos

BrandBitspower

Klausimai apie šią prekę

What CPU cooler mounting hardware do I need before applying this 2.5 g syringe of Bitspower Baircool TP-1?

You need a compatible CPU cooler or water block already installed on the motherboard; the paste itself only fills the microscopic gaps between the cooler base and the processor heat spreader.

Can I use this 6.5 W/m-K non-silicone grease on an older processor that previously had standard silicone paste?

Yes — clean the old compound thoroughly with isopropyl alcohol, then apply the TP-1; its low 0.009 K-in²/W impedance and non-corrosive formula work safely on legacy CPUs.

How do I confirm the paste is performing correctly after assembly?

Monitor CPU core temperatures under load; a drop of several degrees versus the previous paste indicates the 6.5 W/m-K conductivity and low dry-out are working as intended.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.