NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
Brute Networks
16GB DDR4-2133 ECC registered RDIMM with CL15 latency and 1.2V operation for compatible Dell servers
This 16 GB DDR4-2133 registered DIMM operates at 1.20 V with CL15 latency and a 2Rx4 organisation. It carries ECC error correction and is built with major-brand DRAM chips. The module matches Dell part number A7945660 and is guaranteed compatible with systems that accept this specification. It suits administrators expanding memory in supported Dell PowerEdge servers.
Replacing smaller RDIMMs with this 16 GB module increases total capacity and reduces swapping in virtualised workloads. The jump is worth it when the server has free 288-pin slots and the memory controller supports DDR4-2133 registered ECC. Adding modules of identical speed, voltage, rank and CAS latency preserves matched-channel performance.
Check the server manual for the number of 288-pin DDR4 slots, the maximum supported memory per socket and any rank-per-channel restrictions. Confirm the platform requires registered ECC RDIMMs at 1.20 V and accepts 2Rx4 modules. Ensure the BIOS is current enough to recognise the full 16 GB capacity.
| Brand | Dell |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
The module uses the standard 288-Pin DDR4 form factor for registered DIMMs; it fits any server slot designed for DDR4 RDIMMs.
Align the notch with the slot key, press firmly straight down until both side clips click locked; the register adds resistance so ensure full seating.
DDR4 RDIMMs have no scheduled replacement interval; replace only if memory diagnostics report correctable or uncorrectable ECC errors.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?