NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Brute Networks
16GB DDR4-2133 ECC registered RDIMM with CL15 latency and 1.2V operation for compatible Dell servers
This 16 GB DDR4-2133 registered DIMM operates at 1.20 V with CL15 latency and a 2Rx4 organisation. It carries ECC error correction and is built with major-brand DRAM chips. The module matches Dell part number A7945660 and is guaranteed compatible with systems that accept this specification. It suits administrators expanding memory in supported Dell PowerEdge servers.
Replacing smaller RDIMMs with this 16 GB module increases total capacity and reduces swapping in virtualised workloads. The jump is worth it when the server has free 288-pin slots and the memory controller supports DDR4-2133 registered ECC. Adding modules of identical speed, voltage, rank and CAS latency preserves matched-channel performance.
Check the server manual for the number of 288-pin DDR4 slots, the maximum supported memory per socket and any rank-per-channel restrictions. Confirm the platform requires registered ECC RDIMMs at 1.20 V and accepts 2Rx4 modules. Ensure the BIOS is current enough to recognise the full 16 GB capacity.
| Brand | Dell |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
The module uses the standard 288-Pin DDR4 form factor for registered DIMMs; it fits any server slot designed for DDR4 RDIMMs.
Align the notch with the slot key, press firmly straight down until both side clips click locked; the register adds resistance so ensure full seating.
DDR4 RDIMMs have no scheduled replacement interval; replace only if memory diagnostics report correctable or uncorrectable ECC errors.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?