NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
Brute Networks
An 8GB DDR4 2133 ECC UDIMM with 2Rx8 rank, CL15 latency and 1.2V operation for HP-compatible servers
This unregistered 288-pin module delivers 8 GB of DDR4 2133 memory with CL15 timing and 1.20 V operation. It carries ECC protection and a 2Rx8 rank layout for data integrity in server workloads. The part matches HP part number 819800-001 and uses major-brand DRAM from Samsung, SK Hynix or Micron. It is suited for administrators expanding capacity in supported HP ProLiant or Apollo systems.
Upgrading from lower-speed DDR4 or non-ECC modules adds error correction and the rated 2133 MT/s throughput where the platform supports it. The jump is worthwhile when the server’s memory controller and BIOS recognise the 2Rx8 organisation and can run at the specified voltage. Mixed-rank populations may limit channel speed, so the gain applies only when all slots use matching specifications.
Confirm the motherboard accepts unregistered 288-pin DDR4 UDIMMs and supports 2Rx8 density at 1.20 V. Check the qualified-vendor list or maintenance guide for maximum DIMMs per channel and any rank-per-channel limits. Ensure all modules in a channel share identical speed, latency and rank configuration to avoid down-clocking or boot failure.
| Brand | HP |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unregistered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
The module uses the standard 288-pin DDR4 UDIMM form factor that matches HP 819800-001 slots, so it installs directly without adapters.
Insert the stick firmly until the retention clips click; the server auto-detects 2133 MHz CL15 timing and ECC at 1.20 V with no manual BIOS changes required.
The lifetime warranty covers the module for as long as you own it, backed by 100% testing and validation from major-brand Samsung, SK Hynix or Micron chips.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?