Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 288-pin DDR4 UDIMM module with black chips and gold contacts

Brute Networks

Brute Networks 819800-001 8GB DDR4 2133 ECC UDIMM 2Rx8 1.2V

SKU CH-YH68-JDG18

An 8GB DDR4 2133 ECC UDIMM with 2Rx8 rank, CL15 latency and 1.2V operation for HP-compatible servers

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • 8GB capacity expands server memory for larger workloads
  • DDR4 2133 speed delivers 17000 MT/s data transfer rate
  • ECC protection detects and corrects single-bit memory errors
  • 20V operation reduces power draw versus higher-voltage modules
  • 288-pin UDIMM form factor fits standard unregistered DDR4 slots

HP-compatible 8 GB DDR4 ECC UDIMM

This unregistered 288-pin module delivers 8 GB of DDR4 2133 memory with CL15 timing and 1.20 V operation. It carries ECC protection and a 2Rx8 rank layout for data integrity in server workloads. The part matches HP part number 819800-001 and uses major-brand DRAM from Samsung, SK Hynix or Micron. It is suited for administrators expanding capacity in supported HP ProLiant or Apollo systems.

Replacing slower or non-ECC DIMMs

Upgrading from lower-speed DDR4 or non-ECC modules adds error correction and the rated 2133 MT/s throughput where the platform supports it. The jump is worthwhile when the server’s memory controller and BIOS recognise the 2Rx8 organisation and can run at the specified voltage. Mixed-rank populations may limit channel speed, so the gain applies only when all slots use matching specifications.

Verify slot count and population rules

Confirm the motherboard accepts unregistered 288-pin DDR4 UDIMMs and supports 2Rx8 density at 1.20 V. Check the qualified-vendor list or maintenance guide for maximum DIMMs per channel and any rank-per-channel limits. Ensure all modules in a channel share identical speed, latency and rank configuration to avoid down-clocking or boot failure.

Pluspunten

  • 8GB capacity expands server memory for larger workloads
  • DDR4 2133 speed delivers 17000 MT/s data transfer rate
  • ECC protection detects and corrects single-bit memory errors
  • 20V operation reduces power draw versus higher-voltage modules
  • 288-pin UDIMM form factor fits standard unregistered DDR4 slots

Specificaties

BrandHP
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnregistered
Rank2Rx8
ChipsetMajor Brand Chipset

Vragen over dit artikel

Will the 288-pin DDR4 UDIMM fit my HP server DIMM slots?

The module uses the standard 288-pin DDR4 UDIMM form factor that matches HP 819800-001 slots, so it installs directly without adapters.

Do I need to configure anything in BIOS after seating the CL15 ECC UDIMM?

Insert the stick firmly until the retention clips click; the server auto-detects 2133 MHz CL15 timing and ECC at 1.20 V with no manual BIOS changes required.

How long is the Brute Networks lifetime warranty valid for this 8GB module?

The lifetime warranty covers the module for as long as you own it, backed by 100% testing and validation from major-brand Samsung, SK Hynix or Micron chips.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.