Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

Chenbro

Chenbro SK31101T3 1-bay 3.5" HDD enclosure 12Gb/s SAS SATA cpu accessory

SKU CH-FZ58-2C6JZ MPN SK31101T3

Single 3.5-inch hot-swap bay with 12Gb/s SAS and SATA backplane fits one 5.25-inch chassis slot

  • Fits a single 5.25" bay for compact 3.5" storage
  • 12Gb/s SAS and SATA backplane delivers fast data throughput
  • Hot-swap tray with inrush current control protects drives during swaps
  • Key lock on the carrier secures the installed drive
  • Power and failure LEDs give instant drive status visibility

Single 3.5" Hot-Swap Bay

The Chenbro SK31101T3 fits a single 5.25 inch chassis bay and provides a hot-swap tray for one 3.5 inch hard drive. A 12Gb/s SAS and SATA backplane connects the drive to the host through a single 7-pin connector. The metal SECC carrier includes a key lock and LED indicators for power and drive failure status.

Replaces Fixed Internal Mounts

This enclosure replaces a standard fixed drive cage when you need tool-less drive changes without powering down the server. The backplane handles inrush current control for safe hot-swapping and accepts a failure signal from a RAID or expander card. The upgrade is worth it when uptime and physical security for a single drive are priorities.

Slide-In Installation

Mount the unit into the 5.25 inch bay, connect the 7-pin host cable and the 22+7 pin drive connector, then secure the key lock. The top opening relies on system airflow for drive cooling, so ensure the chassis fans deliver adequate flow across the tray. The carrier LEDs confirm power and fault states once the drive is seated.

Privalumai

  • Fits a single 5.25" bay for compact 3.5" storage
  • 12Gb/s SAS and SATA backplane delivers fast data throughput
  • Hot-swap tray with inrush current control protects drives during swaps
  • Key lock on the carrier secures the installed drive
  • Power and failure LEDs give instant drive status visibility

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

Will this 5.80 x 6.73 x 1.60 inch unit fit my case's 5.25 inch bay?

Yes, it is designed for a single 5.25 inch drive bay and measures 146.0 x 171.0 x 43.0 mm.

Which cable connects the 7 pin host connector to my RAID card for the failure signal?

Use a standard SATA or SAS cable to the 7 pin host port; the failure signal uses a separate single-input header on the backplane.

Can the hot-swap tray be replaced if its 22+7 pin SAS connector wears out?

The tray is a removable carrier; a compatible replacement tray with the same 22+7 pin interface can be swapped in.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.