Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver metal 3.5 inch HDD enclosure with key lock and LED indicators

Chenbro

Chenbro SK31101T3 1-bay 3.5" HDD enclosure 12Gb/s SAS SATA cpu accessory

SKU CH-FZ58-2C6JZ MPN SK31101T3

Single 3.5-inch hot-swap bay with 12Gb/s SAS and SATA backplane fits one 5.25-inch chassis slot

  • Fits a single 5.25" bay for compact 3.5" storage
  • 12Gb/s SAS and SATA backplane delivers fast data throughput
  • Hot-swap tray with inrush current control protects drives during swaps
  • Key lock on the carrier secures the installed drive
  • Power and failure LEDs give instant drive status visibility

Single 3.5" Hot-Swap Bay

The Chenbro SK31101T3 fits a single 5.25 inch chassis bay and provides a hot-swap tray for one 3.5 inch hard drive. A 12Gb/s SAS and SATA backplane connects the drive to the host through a single 7-pin connector. The metal SECC carrier includes a key lock and LED indicators for power and drive failure status.

Replaces Fixed Internal Mounts

This enclosure replaces a standard fixed drive cage when you need tool-less drive changes without powering down the server. The backplane handles inrush current control for safe hot-swapping and accepts a failure signal from a RAID or expander card. The upgrade is worth it when uptime and physical security for a single drive are priorities.

Slide-In Installation

Mount the unit into the 5.25 inch bay, connect the 7-pin host cable and the 22+7 pin drive connector, then secure the key lock. The top opening relies on system airflow for drive cooling, so ensure the chassis fans deliver adequate flow across the tray. The carrier LEDs confirm power and fault states once the drive is seated.

Přednosti

  • Fits a single 5.25" bay for compact 3.5" storage
  • 12Gb/s SAS and SATA backplane delivers fast data throughput
  • Hot-swap tray with inrush current control protects drives during swaps
  • Key lock on the carrier secures the installed drive
  • Power and failure LEDs give instant drive status visibility

Specifikace

Pro tento produkt zatím nejsou zveřejněny žádné specifikace.

Otázky k tomuto produktu

Will this 5.80 x 6.73 x 1.60 inch unit fit my case's 5.25 inch bay?

Yes, it is designed for a single 5.25 inch drive bay and measures 146.0 x 171.0 x 43.0 mm.

Which cable connects the 7 pin host connector to my RAID card for the failure signal?

Use a standard SATA or SAS cable to the 7 pin host port; the failure signal uses a separate single-input header on the backplane.

Can the hot-swap tray be replaced if its 22+7 pin SAS connector wears out?

The tray is a removable carrier; a compatible replacement tray with the same 22+7 pin interface can be swapped in.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.