Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Silver 3.5-inch SAS hard drive in a black Dell Gen 13 tray

DELL

DELL 400-ANTW 10TB SAS 7.2K 3.5" 12Gb/s internal hard drive

SKU CH-Q0RQ-0VGRS MPN 400-ANTW

10 TB SAS drive with 12 Gb/s interface and 7,200 RPM spindle speed, supplied with a 13 GEN tray

  • 10 TB capacity for large data sets
  • 12 Gb/s SAS interface for fast throughput
  • 7200 RPM spindle speed for responsive access
  • 5 inch form factor fits standard bays
  • Includes 13 Gen tray for Dell server installation

Capacity and interface

This is a 10 TB internal hard drive with a SAS 12 Gb/s interface and a 7200 RPM spindle speed. It fits 3.5-inch bays and ships with a 13 Gen tray for direct installation. The drive targets servers and storage arrays that need high-capacity bulk storage on a SAS backplane. It is not suited for systems that only provide SATA ports or lack a compatible drive cage.

Thermals noise and power

Mechanical operation at 7200 RPM produces typical enterprise drive acoustics and heat output under sustained workloads. The SAS interface supports efficient command queuing to help manage power draw during heavy I/O. No specific thermal or acoustic ratings are provided in the source data. Builders without active airflow across the drive bays should verify cooling independently.

Build and mounting

The included 13 Gen tray secures the drive in Dell PowerEdge gen 13 chassis without extra brackets or adapters. A standard 3.5-inch SATA form factor means the underlying dimensions match common drive bays, but the tray keying limits use to compatible Dell servers. Users with non-Dell enclosures or older generation trays will need a different mounting solution.

Privalumai

  • 10 TB capacity for large data sets
  • 12 Gb/s SAS interface for fast throughput
  • 7200 RPM spindle speed for responsive access
  • 5 inch form factor fits standard bays
  • Includes 13 Gen tray for Dell server installation

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

How do I install the 400-ANTW drive into a Dell 13 Gen server tray?

Slide the 3.5" drive into the included 13 Gen tray until the SAS connector seats firmly, then secure the tray latch; the step often missed is not pushing the drive far enough for the backplane pins to engage fully.

What maintenance will the 10TB 7200 RPM SAS drive need over its service life?

No scheduled mechanical maintenance is required; monitor SMART attributes for reallocated sectors and keep the server firmware current so the 12Gb/s link stays error-free.

What performance limit appears first during sustained writes on the 12Gb/s SAS interface?

The 7200 RPM spindle caps sequential throughput well below the 12Gb/s ceiling, so sustained write speed plateaus at the mechanical media rate rather than the interface maximum.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.