Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver 3.5-inch SAS hard drive in a black Dell Gen 13 tray

DELL

DELL 400-ANTW 10TB SAS 7.2K 3.5" 12Gb/s internal hard drive

SKU CH-Q0RQ-0VGRS MPN 400-ANTW

10 TB SAS drive with 12 Gb/s interface and 7,200 RPM spindle speed, supplied with a 13 GEN tray

  • 10 TB capacity for large data sets
  • 12 Gb/s SAS interface for fast throughput
  • 7200 RPM spindle speed for responsive access
  • 5 inch form factor fits standard bays
  • Includes 13 Gen tray for Dell server installation

Capacity and interface

This is a 10 TB internal hard drive with a SAS 12 Gb/s interface and a 7200 RPM spindle speed. It fits 3.5-inch bays and ships with a 13 Gen tray for direct installation. The drive targets servers and storage arrays that need high-capacity bulk storage on a SAS backplane. It is not suited for systems that only provide SATA ports or lack a compatible drive cage.

Thermals noise and power

Mechanical operation at 7200 RPM produces typical enterprise drive acoustics and heat output under sustained workloads. The SAS interface supports efficient command queuing to help manage power draw during heavy I/O. No specific thermal or acoustic ratings are provided in the source data. Builders without active airflow across the drive bays should verify cooling independently.

Build and mounting

The included 13 Gen tray secures the drive in Dell PowerEdge gen 13 chassis without extra brackets or adapters. A standard 3.5-inch SATA form factor means the underlying dimensions match common drive bays, but the tray keying limits use to compatible Dell servers. Users with non-Dell enclosures or older generation trays will need a different mounting solution.

Puncte forte

  • 10 TB capacity for large data sets
  • 12 Gb/s SAS interface for fast throughput
  • 7200 RPM spindle speed for responsive access
  • 5 inch form factor fits standard bays
  • Includes 13 Gen tray for Dell server installation

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

How do I install the 400-ANTW drive into a Dell 13 Gen server tray?

Slide the 3.5" drive into the included 13 Gen tray until the SAS connector seats firmly, then secure the tray latch; the step often missed is not pushing the drive far enough for the backplane pins to engage fully.

What maintenance will the 10TB 7200 RPM SAS drive need over its service life?

No scheduled mechanical maintenance is required; monitor SMART attributes for reallocated sectors and keep the server firmware current so the 12Gb/s link stays error-free.

What performance limit appears first during sustained writes on the 12Gb/s SAS interface?

The 7200 RPM spindle caps sequential throughput well below the 12Gb/s ceiling, so sustained write speed plateaus at the mechanical media rate rather than the interface maximum.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.