Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Full-height PCIe x8 adapter card with dual M.2 slots

DELL

DELL BOSS-S1 Boot PCIe M.2 SSD Adapter Card M7W47

SKU CH-ZGDH-R04RA

Adds two M.2 SSD slots via PCI Express 3.0 x8 for boot-optimised storage on Dell systems

  • InterfacePCI Express 3.0 X8
  • Adds boot M.2 storage via PCIe 3.0 x8 slot
  • Dell-validated adapter ensures system compatibility
  • Dual-module channel enables high-speed connectivity
  • Tolerant disk subsystem guards against failures
  • Full-height card fits standard server chassis

Dell BOSS-S1 Boot PCIe M.2 Adapter Card

The Dell BOSS-S1 Boot PCIe M.2 Adapter Card is a full-height expansion card designed to host M.2 solid-state drives for boot optimisation. It connects through a PCI Express 3.0 x8 interface and is validated on Dell systems with Dell technical support. This adapter suits administrators who need a dedicated, managed boot volume inside a compatible Dell server.

Who this suits and who should look elsewhere

IT teams running Dell servers that require a hardware-validated boot device with dual-module redundancy will find this card a direct fit. Buyers who need a boot adapter for non-Dell platforms or who require a different PCIe lane configuration should consider other solutions because this card is tested only on Dell hardware with the specified x8 interface.

PCI Express 3.0 x8 interface decides fit

The single specification that determines compatibility is the PCI Express 3.0 x8 interface; the host system must provide a matching slot wired for x8 operation. If the available slot does not meet this exact interface requirement the adapter cannot function as intended.

Privalumai

  • Adds boot M.2 storage via PCIe 3.0 x8 slot
  • Dell-validated adapter ensures system compatibility
  • Dual-module channel enables high-speed connectivity
  • Tolerant disk subsystem guards against failures
  • Full-height card fits standard server chassis

Specifikacijos

BrandDELL
Part NumberM7W47
InterfacePCI Express 3.0 X8

Klausimai apie šią prekę

How much power does the PCIe 3.0 x8 adapter draw when running continuously?

Dell does not publish a specific power-draw figure for the BOSS-S1 card; the adapter itself is passive and draws only what the installed M.2 SSDs require.

What must already be in the server for this M.2 adapter to function?

An available full-height PCIe 3.0 x8 slot and one or two compatible M.2 SSDs are required; the card has no onboard storage.

Will the BOSS-S1 card work in an older Dell PowerEdge that only has PCIe 2.0 slots?

The card is validated for PCIe 3.0 x8; it may physically fit a 2.0 slot but Dell only guarantees operation on qualified 3.0 platforms.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.