Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Full-height PCIe x8 adapter card with dual M.2 slots

DELL

DELL BOSS-S1 Boot PCIe M.2 SSD Adapter Card M7W47

SKU CH-ZGDH-R04RA

Adds two M.2 SSD slots via PCI Express 3.0 x8 for boot-optimised storage on Dell systems

  • InterfacePCI Express 3.0 X8
  • Adds boot M.2 storage via PCIe 3.0 x8 slot
  • Dell-validated adapter ensures system compatibility
  • Dual-module channel enables high-speed connectivity
  • Tolerant disk subsystem guards against failures
  • Full-height card fits standard server chassis

Dell BOSS-S1 Boot PCIe M.2 Adapter Card

The Dell BOSS-S1 Boot PCIe M.2 Adapter Card is a full-height expansion card designed to host M.2 solid-state drives for boot optimisation. It connects through a PCI Express 3.0 x8 interface and is validated on Dell systems with Dell technical support. This adapter suits administrators who need a dedicated, managed boot volume inside a compatible Dell server.

Who this suits and who should look elsewhere

IT teams running Dell servers that require a hardware-validated boot device with dual-module redundancy will find this card a direct fit. Buyers who need a boot adapter for non-Dell platforms or who require a different PCIe lane configuration should consider other solutions because this card is tested only on Dell hardware with the specified x8 interface.

PCI Express 3.0 x8 interface decides fit

The single specification that determines compatibility is the PCI Express 3.0 x8 interface; the host system must provide a matching slot wired for x8 operation. If the available slot does not meet this exact interface requirement the adapter cannot function as intended.

Priekšrocības

  • Adds boot M.2 storage via PCIe 3.0 x8 slot
  • Dell-validated adapter ensures system compatibility
  • Dual-module channel enables high-speed connectivity
  • Tolerant disk subsystem guards against failures
  • Full-height card fits standard server chassis

Specifikācijas

BrandDELL
Part NumberM7W47
InterfacePCI Express 3.0 X8

Jautājumi par šo preci

How much power does the PCIe 3.0 x8 adapter draw when running continuously?

Dell does not publish a specific power-draw figure for the BOSS-S1 card; the adapter itself is passive and draws only what the installed M.2 SSDs require.

What must already be in the server for this M.2 adapter to function?

An available full-height PCIe 3.0 x8 slot and one or two compatible M.2 SSDs are required; the card has no onboard storage.

Will the BOSS-S1 card work in an older Dell PowerEdge that only has PCIe 2.0 slots?

The card is validated for PCIe 3.0 x8; it may physically fit a 2.0 slot but Dell only guarantees operation on qualified 3.0 platforms.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.