DELL PowerEdge M640 blade server 2× Xeon Gold 6154 3.0 GHz 18C 64GB DDR4 H330 57810S-K iDRAC9 Enterprise
- Blade
- Blade
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
DELL
Dual 20-core Xeon Gold 6230 processors, 64 GB DDR4 ECC memory, H330 RAID controller and dual 10 Gb networking in a half-height blade form factor
SSD (Installed) No
The Dell PowerEdge M640 is a half-height blade server built for modern data centres. It ships with two Intel Xeon Gold 6230 processors, each offering 20 cores at 2.1 GHz with 3.9 GHz turbo. The system includes 64 GB of DDR4 2666 MHz registered ECC memory across four modules, leaving twelve of sixteen slots free for expansion up to 1.5 TB total capacity. It fits PowerEdge MX and M1000e chassis for scalable deployment.
Internal storage uses a PERC H330 controller supporting SAS and SATA drives in two 2.5-inch bays with RAID 0, 1, 5, 10 and 50. The controller runs at 12 Gb/s but the blade design restricts drive count to two devices. Network connectivity comes from a Broadcom 57810S-K dual-port 10 Gb daughter card, providing high-throughput links within the chassis fabric. NVMe drives are supported by the platform but require compatible backplanes not included here.
Installing the M640 requires a supported PowerEdge MX or M1000e enclosure with available half-height slots and matching midplane connectors. The server arrives without front bezel or ready rails, so those must be sourced separately for the target chassis. iDRAC 9 Enterprise enables remote management once networked, but initial configuration needs chassis-level access. Memory and processor upgrades follow standard blade procedures, though maximum CPU count is already reached at two sockets. No operating system is pre-installed.
| Brand | DELL |
|---|---|
| Series | PowerEdge M640 |
| Type | Blade |
| Rack Height | Blade |
| CPU Type | Intel Xeon |
| CPU Speed | 2.10 GHz |
| CPU Socket | LGA 3647 |
| Number of CPU Cores | 20-Core Processor |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 64GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 2TB |
| Number of Memory Slots | 16 |
| Storage Controller | Dell Perc H330 Controller |
| SSD (Installed) | No |
| Raid Level | RAID 0/1/5/10/50 |
| GPU Type | Matrox G200 |
| Video Memory | 8MB |
| Ethernet Controller | Dell Broadcom 57810S-K 10Gb Dual Port Blade Network Daughter Card |
| Management Port | RJ 45 |
| Operating System | No |
Kiti šio modelio variantai
Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.
The blade has 16 DDR4 slots and supports up to 1.5 TB total, so you can populate the remaining 12 slots with registered ECC modules.
Turbo frequency is opportunistic; with all 20 cores per socket active the sustained speed will sit at or near the 2.1 GHz base clock.
Each port runs at 10 Gb/s over the blade backplane, giving up to 20 Gb/s aggregate bandwidth per server.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?