Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black cylindrical centrifugal fan 146mm blade diameter 230V 2050 rpm

Fans

Fans D2E146-AP47-F8Motor case fan 146mm 230V 300/330W 2050 rpm

SKU CH-SW76-C6TFB MPN D2E146-AP47-F8Motor

A 146 mm centrifugal fan running at 2050 rpm on 230 V, drawing 1.31/1.45 A to deliver 300/330 W for ABB inverter cooling

  • Centrifugal airflow cools inverter drives efficiently
  • 230 V AC supply fits industrial power systems
  • 300/330 W motor delivers strong cooling performance
  • 2050 rpm blade speed moves high air volume
  • 146 mm diameter suits compact equipment enclosures

Centrifugal fan for ABB inverter cooling

The D2E146-AP47-F8Motor is a new centrifugal case fan built for ABB inverter cooling. It runs on 230 V mains voltage and draws 1.31 A at 300 W or 1.45 A at 330 W. The 146 mm blade diameter spins at 2050 rpm to move air through the drive enclosure.

Fits standard inverter enclosures

This unit mounts directly in the fan tray of compatible ABB inverters, so no extra ducting or adapter brackets are required. Its 230 V supply lets it run from the same mains feed that powers the drive, freeing up low-voltage headers on the control board for other peripherals.

Steady output at 2050 rpm

The motor maintains 2050 rpm continuously at either 300 W or 330 W load points, delivering consistent airflow during long duty cycles. Current stays within the rated 1.31 A to 1.45 A band, so thermal protection trips are unlikely even when the inverter runs at full output for extended periods.

Privalumai

  • Centrifugal airflow cools inverter drives efficiently
  • 230 V AC supply fits industrial power systems
  • 300/330 W motor delivers strong cooling performance
  • 2050 rpm blade speed moves high air volume
  • 146 mm diameter suits compact equipment enclosures

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

What limits continuous running at the rated 2050 rpm?

The motor draws 1.31 A at 300 W or 1.45 A at 330 W on 230 V, so thermal protection or supply capacity will be the first limit under sustained load.

How much noise and heat does the 146 mm centrifugal fan produce at full speed?

At 2050 rpm the unit moves air for ABB inverter cooling; expect noticeable airflow noise and motor heat proportional to the 300–330 W power draw.

What existing equipment is needed to install this 230 V fan?

A 230 V AC supply capable of at least 1.45 A and a mounting arrangement suited to a 146 mm blade diameter are required.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.