Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black cylindrical centrifugal fan 146mm blade diameter 230V 2050 rpm

Fans

Fans D2E146-AP47-F8Motor case fan 146mm 230V 300/330W 2050 rpm

SKU CH-SW76-C6TFB MPN D2E146-AP47-F8Motor

A 146 mm centrifugal fan running at 2050 rpm on 230 V, drawing 1.31/1.45 A to deliver 300/330 W for ABB inverter cooling

  • Centrifugal airflow cools inverter drives efficiently
  • 230 V AC supply fits industrial power systems
  • 300/330 W motor delivers strong cooling performance
  • 2050 rpm blade speed moves high air volume
  • 146 mm diameter suits compact equipment enclosures

Centrifugal fan for ABB inverter cooling

The D2E146-AP47-F8Motor is a new centrifugal case fan built for ABB inverter cooling. It runs on 230 V mains voltage and draws 1.31 A at 300 W or 1.45 A at 330 W. The 146 mm blade diameter spins at 2050 rpm to move air through the drive enclosure.

Fits standard inverter enclosures

This unit mounts directly in the fan tray of compatible ABB inverters, so no extra ducting or adapter brackets are required. Its 230 V supply lets it run from the same mains feed that powers the drive, freeing up low-voltage headers on the control board for other peripherals.

Steady output at 2050 rpm

The motor maintains 2050 rpm continuously at either 300 W or 330 W load points, delivering consistent airflow during long duty cycles. Current stays within the rated 1.31 A to 1.45 A band, so thermal protection trips are unlikely even when the inverter runs at full output for extended periods.

Poudarki

  • Centrifugal airflow cools inverter drives efficiently
  • 230 V AC supply fits industrial power systems
  • 300/330 W motor delivers strong cooling performance
  • 2050 rpm blade speed moves high air volume
  • 146 mm diameter suits compact equipment enclosures

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

What limits continuous running at the rated 2050 rpm?

The motor draws 1.31 A at 300 W or 1.45 A at 330 W on 230 V, so thermal protection or supply capacity will be the first limit under sustained load.

How much noise and heat does the 146 mm centrifugal fan produce at full speed?

At 2050 rpm the unit moves air for ABB inverter cooling; expect noticeable airflow noise and motor heat proportional to the 300–330 W power draw.

What existing equipment is needed to install this 230 V fan?

A 230 V AC supply capable of at least 1.45 A and a mounting arrangement suited to a 146 mm blade diameter are required.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.