Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
FormulaMod
Supplies ATX 24-pin, CPU 8-pin and PCIe 8-pin power via 18 AWG white cables with pre-fitted combs at 300 mm length
Color White
Perbrauktos versijos egzistuoja, bet šiame sandėlyje jų nėra.
The FormulaMod Fm-NCK1 kit supplies pre-assembled cables that connect a power supply to the motherboard and graphics card inside a liquid-cooled chassis. White 18 AWG conductors run 300 mm from male 5557 to female 5559 connectors, and each cable includes two matching combs for alignment. The set covers ATX 24-pin, PCI-E 8-pin and CPU 8-pin paths in a single package.
Because the kit carries only electrical current, it adds no heat, noise or fan load to the cooling loop. The 18 AWG gauge is rated for the current delivered by standard desktop power supplies, so voltage drop across the 300 mm length remains negligible. No active components are present, leaving the thermal and acoustic profile entirely unchanged.
The fixed 300 mm length suits compact reservoirs and tight routing channels where stock cables would bunch or kink. Male-to-female 5557-to-5559 interfaces plug directly into existing PSU and component headers without adapters. Pre-fitted combs keep wires parallel, freeing space around water blocks and radiators for cleaner tubing runs.
| Series | N/A |
|---|---|
| Type | Accessories |
| Fan Size | No Fans |
| Color | White |
Align the 5557 male connector with the PSU port and the 5559 female connector with the component header, then press straight in until the latch clicks; the 18 AWG cores are stiff, so do not rock the plug sideways or the pins can bend.
The sleeving is colour-fast under normal case temperatures and the combs snap tightly onto the 3 mm diameter cables; they do not require scheduled replacement unless you physically break a comb during a rebuild.
The fixed 300 mm reach from PSU to component is the first constraint; if the grommet-to-header distance exceeds that, the cable will pull tight and you cannot extend it without ordering a custom length.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?